How to Locate the Cabin Air Filter in a 2003 Ford F-350 Super Duty

Save

Most 2003 Ford-F350 Super Duty trucks did not come equipped with a cabin filter. The cabin filter was an optional feature installed by using Ford kit number F65Z-18D477AA. If this kit was installed on the F-350, it has a cabin air filter. The easiest way to tell if you have a cabin air filter is by locating it. If your F-350 has a cabin air filter, you'll need to replace it every 15,000 miles to keep your air conditioning performing well and your interior air fresh.

Things You'll Need

  • Phillips screwdriver
  • Turn your ignition off and remove the key. Access the passenger-side floorboard by entering the F-350 through the passenger side door.

  • Look closely underneath the glove box. There is a black plastic cover mounted on the rear. Remove the five Phillips-head screws from the cover. Pull the cover down to remove it.

  • Inspect the area behind the cover. If the F-350 has a cabin air filter, you'll see a rectangular filter-access door with tabs on the end. Squeeze these tabs to remove the cover. The cabin air filter is behind it.

Tips & Warnings

  • If you are ready to replace the cabin air filter, simply slide the old filter down. Insert the new filter fully and replace the access door and the compartment cover. Tighten the screws.
  • If your F-350 does not have a cabin air filter, and you would like to install one, visit your nearest Ford dealership. There is a special Ford kit, F65Z-18D477AA, required to complete the installation.

References

  • Photo Credit Jupiterimages/Comstock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

Related Searches

Check It Out

How To Travel For Free With Reward Points

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!