How Do I Get the Snow Blower Tires on the Snowblower?
Putting tires on a snowblower can be a hassle, a daunting task that, while necessary, can be frustrating. Putting a snowblower tire on a snowblower, however, is similar to putting a tire on a car. Once you learn the steps in order, you will remember how to put snowblower tires on just like you remember your street address or how to tie your shoes. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Slide the jack under the snowblower's frame. The most secure place to lift from is under the motor. Jack up the snowblower until the tire can easily go onto the machine.
-
2
Unscrew the original tire's bolt in the middle of the rim with a 3/8 inch wrench. Slide the bolt off the arm, and place it on the ground.
-
-
3
Pull the tire off the arm. It should come off with no problem.
-
4
Pry the old tire off the rim with a flat screwdriver. The tire might feel like it won't come off, but it will.
-
5
Fit the new tire on the rim.
-
6
Take the new tire with rim, and slide it on the arm in place of the old tire.
-
7
Tighten the bolt back on the arm so the tire is secure.
-
8
Lower the jack slowly. You don't want the snowblower to slam to the ground.
-
1
Tips & Warnings
To find a new tire, look through your owner's manual or find a local small engine dealer.
Make sure the motor is off before putting a new tire on.
References
Resources
- Photo Credit cleaning driveway image by samantha grandy from Fotolia.com
More Like This
Comments
-
How can I take the tire and rim off an chieftain 5hp 23inch snow blower.
