How to Program a Keyless Remote on a Dodge
Many vehicles today come with keyless remote entry, including most Dodge cars and trucks. The keyless entry allows the owner to unlock doors from a distance. You can program up to four new keyless remotes for your Dodge if you already have a working remote. If you do not have a working remote, visit your Dodge dealership to have them program a remote for you.
Other People Are Reading
Instructions
-
-
1
Push the "Lock" button on your working remote five times at two second intervals.
-
2
Turn the key in the ignition to "Run." The "Run" position is the furthest you can turn the key before starting the engine. Wait for the chimes to stop.
-
-
3
Push and hold the "Unlock" button on the working remote for four to ten seconds.
-
4
Press the "Panic" button while holding the "Unlock" button. Then release both buttons at the same time. After about three seconds, your car will chime again to indicate programming mode.
-
5
Push the "Lock" and "Unlock buttons at the same time and release them at the same time on the working remote. There will be another chime.
-
6
Push and release the "Unlock" button on the working remote within 30 seconds.
-
7
Repeat steps 5 and 6 to program your new remote. You can do this for up to four new remotes.
-
1
