How to Program a Keyless Entry Remote For a 97 Nissan Maxima

Program your keyless entry remote.

The 1997 Nissan Maxima comes with a keyless entry system with a remote that fits on a key chain. When a remote is lost or broken it can easily turn into a costly visit to a mechanic or locksmith to buy a new remote and have it programmed. To avoid these high costs, purchase a remote from a dealership or online retailer and program it on your own. The procedure takes less than five minutes and multiple remotes can be programmed at one time.

Things You'll Need

• Keyless entry remote
• Ignition key

Instructions

1. Sit in the vehicle and lock all of the doors using the driver door lock button.

2. Insert the key into the ignition and then remove it completely from the ignition. Do this six times within 10 seconds. Wait for the vehicle hazard lights to flash to indicate that you have entered programming mode.

3. Put the key back into the ignition and turn it to the on or ACC position.

4. Press the lock button on your keyless remote and wait for the hazard lights to flash again. This must be done within five seconds of turning the key in the ignition.

5. Lock and then unlock the vehicle doors using the buttons on the driver's side door to program any additional remotes. Within five seconds of unlocking the doors, hit the lock button on the remote and wait for the hazard lights to flash. Repeat this with each additional remote.

6. Remove the key from the ignition and exit the vehicle. Close all doors and test your remotes to ensure they are working correctly.

References

• Program Your Remote: 1997 Nissan Maxima