A fluorescent starter is a small, metallic cylinder that plugs into a socket of a fluorescent fixture. The starter's purpose is to send a delayed jolt of ionized gas to the bulb to conduct electricity. A defective starter can cause the bulb to flicker continuously or leave you in total darkness. If the fluorescent fixture is less than 15 to 20 years old, chances are good that it doesn't contain a starter. If the fixture uses a starter, there is only one good way to test it: by replacing it with a good starter.
Things You'll Need
- Extra starters of equal wattage
Turn the power off. Check whether or not the fluorescent fixture contains a starter, which is usually located in plain view. Look underneath bulbs and, if necessary, remove them. If no starter is visible, the fixture is modern and contains no starter.
Starters correspond to the wattage of the fluorescent bulbs they run. Find out what wattage bulbs the fixture contains. Purchase a corresponding starter from the hardware store. It is a good idea to purchase a few to keep around the house.
Remove the old starter by pressing in and turning it counterclockwise.
Replace the new starter in the socket by pressing inward and turning clockwise.
Return fluorescent bulbs to the socket if they were removed to reach the starter. Turn on the switch. If the light comes on and doesn't flicker continuously, the starter was the problem. If the fixture doesn't light or continues to flicker, the problem lies elsewhere.
Tips & Warnings
- Throw away all bad starters because its difficult to distinguish between good and bad starters.
- Make sure power is off when testing fluorescent starters.
- Photo Credit Cfl fluorescent lightbulb on dark background image by Silverpics from Fotolia.com
How to Test the Ballasts in Fluorescent Light Fixtures
Fluorescent light ballasts control the voltage delivered to the fluorescent tubes, allowing them to start and to operate at rated output. When...
How to Test Fluorescent Lamps
If your fluorescent bulb is flickering, switching on and off by itself, or dead altogether, test the bulb first. Testing a fluorescent...
How to Stop a Fluorescent Tube Flicker
A fluorescent lamp is a glass tube coated with phosphor powder, and filled with an inert gas and a small amount of...
How to Fix Fluorescent Lights With No Starters
Fluorescent light fixtures have evolved over the last few years. The fixtures no longer require a separate starter to turn the fluorescent...
How to Replace the Starter for a Fluorescent Light
Fluorescent light fixtures sold in hardware stores as of 2010 are a little different than the ones sold a decade ago. Today's...
How to Repair a Fluorescent Shop Light
Shop lights are inexpensive fluorescent lights that typically have no cover or lens. The exposed tubes and the fixtures are more utilitarian...
How to Tell If a Fluorescent Tube Is Bad?
It's generally easy to tell when an incandescent bulb has burned out. Simply look at the filament to see if it is...
How to Test Starters
The starter is responsible for cranking your engine when you turn on the ignition key. This helps to bring your engine to...