How to Refinish MDF Furniture

Save

Medium-density fiberboard, or MDF, is made from small pieces of wood that have been fused together to form solid sheets. These sheets are then used to construct furniture, doors and trim molding. Refinishing MDF furniture cannot be done in the traditional sense because you cannot sand away the original finish and apply a coat of stain. MDF can be painted with good results.

Things You'll Need

  • Degreasing cleaner
  • Sandpaper
  • Primer
  • Paint
  • Paintbrush
  • Foam roller
  • Polyurethane
  • Clean the furniture with degreasing cleaner to completely remove any grime or residue from the surface. Remove any door or drawer pulls from the furniture and set aside.

  • Sand the furniture to create texture. Roughing up the surface of the furniture will create grooves and allow the primer to sink into the surface and adhere to the MDF. Do not sand so much that you remove the top layer. Once you have reached the particle board, the MDF will start to crumble. Wipe away sanding dust with a damp rag.

  • Prime the surface of the furniture with a bonding primer. Apply the primer with a paintbrush in all corners and hard-to-reach areas. Follow with a smooth foam roller to paint the larger surfaces. Allow the primer to dry.

  • Paint the furniture with interior latex or acrylic paint. Use a paintbrush for all areas that can’t be reached with a roller. Follow with a smooth foam roller to eliminate brush strokes and smooth out visible seams. Apply paint with a roller for all larger surfaces. A smooth foam roller applies paint in a thin, even coat. Apply two to three coats of paint, allowing each to dry before applying the next.

  • Apply polyurethane topcoat to the furniture with a good-quality, clean paintbrush. Small bubbles may appear in the surface of the topcoat as you're are applying it but will disappear after a few minutes. Apply one to two coats of polyurethane.

Tips & Warnings

  • Wait three to four days to allow the paint to cure before putting the hardware back on the furniture.
  • Painted MDF may scratch easily. Touch up any scratches with a small artist’s brush.

References

  • Photo Credit armoire 2 image by Nathalie P from Fotolia.com
Promoted By Zergnet

Comments

You May Also Like

  • MDF vs. Wood Cabinets

    Wood and medium-density fiberboard are materials used to build cabinets. MDF is a manufactured product consisting of wood byproducts and resin glued...

  • What Is Mdf in Furniture?

    MDF stands for Medium Density Fibreboard. The use of MDF in furniture is common and can make up an entire piece of...

  • How to Paint MDF Furniture

    MDF furniture can make a wonderful, cheap update for a home on a tight budget. But when it comes time for a...

  • How to Repair Medium Density Fiberboard

    Medium-density fiberboard (MDF) is an engineered wood product made from compressed wood fibers. It is generally cheaper than solid wood with a...

  • How to Finish Mdf

    MDF is an inexpensive composite wood product formed from wood fibers and resin bonded under heat and pressure. It is used more...

  • How to Get Rid of Mold and Mildew on Unpainted MDF

    Medium density fiberboard--also known as MDF--is a popular building material for cabinet speakers, cupboards and bookcases. If the unpainted MDF becomes wet...

  • How to Refinish MDF Thermofoil Cabinets

    MDF, or medium density fiberboard, is made from bits of wood that are fused together and pressed into solid sheets. You can...

  • How to Paint MDF Kitchen Cabinets

    MDF is commonly used to construct trim molding, furniture and cabinets. MDF, or medium-density fiberboard, is composed of small bits of wood...

  • How to Build Furniture From MDF (Medium-Density Fiberboard)

    MDF is a sheet good made from wood byproducts and adhesive, usually manufactured in 4-by-8-foot sheets. It is used extensively in the...

  • How to Waterproof MDF

    Waterproofing medium-density fiberboard (MDF) will protect the MDF board from becoming damaged and deformed when exposed to moisture. MDF is used as...

  • Can You Stain and Varnish MDF?

    MDF stands for medium density fiberboard. MDF is a construction material made from millions of tiny wood fibers that are compressed together...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!