Building a dam for a school project is generally done to illustrate why dams are built and how power is generated as a result. Building one is simple, inexpensive and fun.
Things You'll Need
- Paper milk carton (1/2 gallon)
- Masking tape
Prepare an area for the experiment--over a sink, in a tub, or on a water table. Gather all your materials nearby.
Cut the top off the milk carton and lay the carton on its side. Measuring up from the bottom, go 1/2 inch up and poke a hole with the nail in the center of the side (hold the carton from the inside to keep it from collapsing). Moving up from that hole go up another 1/2 inch (1 inch total) and poke another hole above the first. Move up another inch (2 inches total) and poke a third hole in a straight line above the first two. Move up 2 more inches (4 inches total) and poke a final hole aligned with the rest.
Cover the four holes with a single strip of masking tape.
Mark the inside of the carton with a water line near the top to use when doing the experiment more than once and always fill to that line.
Fill the carton with water to the line and set the carton on so that the water will run into the drain.
Remove the tape quickly to allow water to drain from all four holes at the same time. Make note of how far each stream travels in the sink. Also, note what happens as the water runs out and the water level drops.
Re-tape the carton and do the experiment again. This time, though, only uncover one hole at a time, measure the distance the water travels and re-tape it. Move onto the next hole and do the same, refilling the carton to the fill line each time.
Provide answers to why the water from the hole closest to the bottom travelled farthest. That hole has the greatest mass of water on top, which equals water pressure, causing it to travel further and faster. This is how hydroelectric plants work in conjunction with dams. The water pressure at the base of the dam turns huge turbines that generate electricity.
Tips & Warnings
- When poking the holes, try to keep them all the same diameter.
- Photo Credit the hoover dam image by Darren White from Fotolia.com
Hoover Dam Information for Kids
Hoover Dam is located on the Colorado River between Arizona and Nevada. At 725 feet, it is the tallest concrete dam in...
How to Make Models for School Projects
Many science fair and school projects involve creating a model showing your project's subject. Examples are a miniature version of the solar...
How to Make a Dam Model for a Science Project
Dams control the flow of water, create electricity and can be used for emergency water control. A dam must withstand the pressure...
How to Build a Dam Craft With Popsicle Sticks
Building a dam craft with popsicle sticks fits easily into studies on water power, energy sources and electricity, and ecosystems. Many children...
Working Models of Science Projects
Making a science project that is just a visual demonstration of some scientific principal can get boring. A fun and innovative way...
Flood Projects for School
Studying the effects of flood waters can teach people how to better prepare for and possibly prevent the resulting devastation. Children of...
Water Dam Science Projects
Dams are used to divert or hold back water from rivers and other waterways. While humans construct them to generate electricity, create...
Ideas for School Science Models
Whether you're setting up for a school fair, assigning a project or working on an activity in class, science models should go...
Hydroelectric School Projects
As the debate over fossil fuel dependency becomes more common, alternative sources of energy are being more rigorously examined as a potential...
Beaver Dam Craft Projects for Kids
Whether studying dams and beavers with your child or visiting a rustic lodge retreat near rivers, setting up a beaver dam craft...