How to Fix a Stucco Wall


Stucco is a popular exterior siding material because it is attractive, durable and long-lasting. But stucco is not indestructible. Cracks, chips and gouges can appear no matter how lovingly your home is cared for, and if you don’t repair stucco walls quickly, the damage can get worse. Fortunately, it’s not that hard to fix damaged stucco. Working quickly is important, because stucco dries fast, but if you plan ahead and don’t dawdle, you can repair cracked stucco without having to call in a professional.

Things You'll Need

  • Ball-peen hammer
  • Chisel
  • Shears
  • Repair mesh
  • Staple gun
  • Stucco mix
  • Water
  • Bucket or basin
  • Trowel
  • Paint (optional)
  • Paint sprayer (optional)
  • Place the narrow end of the chisel against the wall at a 45-degree angle—the angle does not have to be precise—and tap the top of the chisel with your ball-peen hammer to chip away the edges of the damaged stucco. This will thin the edges enough to allow you to feather the new stucco onto them, which makes the patch less noticeable.

  • Cut a piece of support mesh that is large enough to cover the old mesh that has been exposed by the damaged stucco. This does not need to fit perfectly. Eyeball it the best you can, but make sure that none of the new mesh sticks out over the undamaged stucco.

  • Mix your stucco with water according to the manufacturer’s instructions. Different stucco mixes call for different proportions of water, so follow the recommendations on the brand you have chosen.

  • Trowel the stucco onto the wall in a thick layer, keeping it to within about ¼ inch below the surface of the existing stucco. You need to leave room for a second layer and a finish layer, and you don’t want the new stucco to stick out from the wall like a stone pimple.

  • Use the point or edge of the trowel to make score marks in several different directions in the stucco, when it is firm but not fully dried.

  • Let the stucco dry for two days.

  • Apply a second coat of stucco, building it up to within about 1/8 inch of the existing stucco’s surface. This measurement does not have be precise; just eyeball it. Make this layer a little smoother than the first one, and let it cure for two days.

  • Wet your trowel and smooth on the final coat of stucco. Feather the edges up over the existing stucco to blend in the patch, and try to keep the new stucco as level with the old stucco as you can. Try to match the texture, if you can. Let this final layer cure for at least four days.

  • Spray a coat or two of paint on the cured stucco, if the existing wall has been painted. If you do not have matching paint, you can take a small piece that you chipped off to a home improvement store to have the color matched.

Related Searches


  • Photo Credit blue stucco image by jimcox40 from
Promoted By Zergnet



You May Also Like

  • How to Fix a Stucco Ceiling

    Whether you're dealing with water stains, or severe damage to a stucco ceiling, getting the texture to match can be complicated. However,...

  • How to Repair a Hole in an Outside Stucco Wall

    Stucco has been a popular exterior architectural material for generations. It is versatile, attractive, weather-resistant and fireproof. Traditionally, stucco application is made...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!