For centuries, beautiful homes have been fashioned from logs. While many of these homes have been lovingly preserved, unfortunately many have suffered damage caused by neglect and poor maintenance. If your log home is showing signs of rot from sun, moisture or insect infestation, return it to its original beauty and structural integrity by repairing or replacing rotted logs.
Things You'll Need
- Screwdriver or ice pick
- Colored plastic tape
- Chain saw
- Saber saw
- Pry bar
- Metal plate & wood screws
- Shingle oil
Use a pressure hose to wash down the logs. It is easier to see evidence of log damage if the the logs are clean. When the logs have dried, carefully examine each log. Inspect the foundation, crawl space, attic and under the eves. Tap along each log with a hammer. If the log is rotted internally, the hammer will cause a hollow sound. Poke at the spot with a screwdriver point or ice pick. If the log is easily penetrated, it is rotted. Mark sections of log rot with colored plastic tape. (Log rot is often caused by moisture buildup. Logs along the foundation are most affected. Snow accumulation and rain-splash often cause severe damage.)
Inspect the roof. Look for "swags" or settling where the roof has bowed. Examine the roof joists.
Eliminate termites or other insect infestation evident in the logs. Termites and carpenter ants can cause extensive damage to a log home. Make sure that the infestation is controlled before proceeding with repairs.
Enlist the services of a log-home professional if the log rot is extensive. A complete inspection and consultation will save both money and time. Many of the repairs can be accomplished by the do-it-yourself homeowner, however if the home's structural integrity is compromised, professional equipment and experience are recommended.
Chip out small areas of rot with a hammer and chisel. Remove all rotted material until sound wood is encountered. Apply a coat of petroleum-based shingle oil to coat the wood. Fill in the damaged area with epoxy, following directions on the oil container.
Cut out larger portions of damaged logs with a saber saw equipped with a metal cutting blade. The blade will cut through nails, spikes or posts that may be holding the log in place. Use a pry bar to help remove the cut portion of log. Use a chain saw to cut a new section of log to fit the spot where the log was removed. Choose a log of similar type and style as the section you removed. Use 2-inch wood screws to attach metal plates on both ends of the replacement log, joining the new log to the adjoining log section.
Cover repaired section with shingle oil to preserve the wood and replace the caulking.
Tips & Warnings
- Ear and eye protection are recommended when working with power tools.
- Photo Credit corner of log cabin image by jimcox40 from Fotolia.com
How to Repair a Rotted Windowsill
Replacing a rotted or damaged windowsill is pretty simple: Take out the old sill, cut a replacement sill and install it.
How to Replace Logs on a Log Home
Log homes are especially venerable to moisture and insect infestation. Built of natural materials, log structures are often damaged from neglect and...
How to Pressure Wash Log Cabins
Log cabins are a rich tradition for rustic living. Pioneers who settled the country often lived in homemade log cabins. Even with...
How to Replace a Log in a Log Cabin
Log cabins and homes have a certain rustic appearance that many people appreciate but often have poor construction that can leave the...
Do it Yourself: Log Home Repair
Yearly inspection of your log home is essential to maintain its beauty and structural integrity. Regular maintenance will avoid costly repairs later...
How to Repair & Prevent Wood Rot
Repairing and preventing home wood rot is best done with an interior/exterior paintable and stainable wood filler. Keep wood from deteriorating with...