How to Change 1997 Camaro Tail Light Bulbs

Automobiles are the biggest single purchase (aside from a home) that most of us will ever make. Taking care of this investment requires regular oil changes, tune-ups and inspections. One aspect of car care that is usually overlooked until they are broken are the various safety lights. These little bulbs go a long way in keeping a driver safe and they should be checked regularly for proper functioning. Each automobile has a slightly different procedure for replacing tail lights. On the 1997 Chevrolet Camaro, there are two different types of bulb depending on the trim options.

Instructions

1. Open the trunk of the 1997 Camaro and peel back the carpet in the corners near the hatch. On either side will be an access panel. There will be a couple plastic screws that can be turned by hand. Turn these counterclockwise so that the screw lines up with the holes and pull off the access panel cover.

2. Remove the old tail light bulb. Pull the bulb out of the casing and out of the sockets. Take the bulb to the local auto parts store to get a replacement. Two possible replacement bulbs exist for a 1997 Chevrolet Camaro, either a wedge base or a bayonet base.

3. Push the new bulb into place and replace the access panel cover. Lay the trunk carpet back down and close the trunk.

References

• How to fix a tail light