How to Make a Homemade Submarine for Science Class

••• Robinson Cartagena Lopez - RoCarLo/Demand Media

Building a homemade submarine is a school project that teaches principles of gravity, pressure, friction and buoyancy. It can also be an economical project that uses common materials and one that does not require special skills or large amounts of time to complete. You can craft a submarine while learning to understand why these machines are able to move up and down in the water.

    ••• Robinson Cartagena Lopez - RoCarLo/Demand Media

    Cut three small holes into one side of the soda bottle. The holes must be equally spaced at least one and a half inches apart. Dot the areas to be cut with the black marker.

    ••• Robinson Cartagena Lopez - RoCarLo/Demand Media

    Stack the quarters into a group of four and the nickles into a group of four. These stacks will serve as weights. Wrap each stack of coins in the adhesive tape, tightly securing the tape around the coins. The stacks must be firm.

    ••• Robinson Cartagena Lopez - RoCarLo/Demand Media

    Place the rubber bands around the plastic bottle, putting one just beneath the hole that is closest to the bottom of the bottle and one beneath the hole that is closest to the top of the bottle. Position the four-quarter stack under the rubber band that is closest to the bottle's bottom and the four-nickle stack under the rubber band that is closest to the bottle's top. The weights should be next to the holes but should not cover up the holes.

    ••• Robinson Cartagena Lopez - RoCarLo/Demand Media

    Remove the bottle's cap and insert the shortest end of the straw (about an inch long) into the opening. Mold the clay around the opening, making sure the area is sealed from water entering and that the straw is secure with its long end bent upwards.

    ••• Robinson Cartagena Lopez - RoCarLo/Demand Media

    Lower the submarine, with the weights facing down, into the bowl or aquarium. Let the bottle fill up with water, but not through the long end of the straw. The top of the straw should not go under the water. When the submarine is filled with water and stops sinking, blow into the straw. Observe the actions of the submarine and record them in your notebook.

    Things You'll Need

    • Empty 12 ounce plastic soda bottle
    • 2 wide rubber bands
    • 8 coins (4 quarters and 4 nickles)
    • Adhesive tape
    • Modeling clay
    • Flexible straw
    • Black marker
    • Scissors
    • Bowl of water or an aquarium
    • Notebook

Related Articles

How to Make a Submarine Project Science Experiment
How to Make a Homemade Submarine That Floats & Sinks
How to Make a Submarine Out of a Water Bottle
How to Blow Up a Balloon With Vinegar and Baking Soda...
How to Make a Rocket Car With Baking Soda & Vinegar
How to Make a Human Heart Out of Pop Bottles
How to Mix Vinegar & Baking Soda in a Bottle Rocket
How to Build an Egg Catapult
How Are Plastic Grocery Bags Made?
How to Build a Submarine for a Kids Science Project
Egg Drop School Projects
How to Make Containers for an Egg Drop Experiment
Rocket School Projects
How to Simulate a Tornado
Self-Powered Car Science Projects
How to Make a Coke Can Boat
How to Build a Newton Car
How to Make a Whirlpool Science Project
How to Make a Hydraulic Lift for a School Project

Dont Go!

We Have More Great Sciencing Articles!