How to Repair a Slide Projector

Techwalla may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.

A slide projector is still a popular way to view color slides of a family outing, trips and other memories shot with a camera. But slides often get stuck in the projector's slot because they rely solely on gravity to move them into display position. Removing the jammed slide will keep it from being damaged by the heat of the bulb.

Advertisement

Step 1

Turn off the slide projector and remove the power plug from the electrical socket. Wait for the bulb to completely cool down.

Video of the Day

Remove the slide tray from the projector by releasing a latch or inserting and turning a coin into a slot in the middle of the tray. Put the tray aside on a clean cloth.

Advertisement

Step 2

Take the canned air and blow it straight across the slot of the projector so that any dirt or dust is blown away.

Take the tweezers and insert it into the slot on the slide projector. Carefully grab the cardboard frame of the slide. Slowly pull the slide straight up and out of the slot.

Advertisement

Blow dust off of the slide with the camel's hair brush. Put the slide next to the slide tray.

Step 3

Take a cotton swab lightly moistened in alcohol and insert it into the slot of the slide projector. Twist the swab around inside the slot. Remove the swab and throw it away.

Advertisement

Take another swab lightly moistened in alcohol and insert the swab into the slot. Rub it against the sides at the top where the slide goes into the slot. Remove the swab and throw it away. Wait for the alcohol to dry.

Advertisement

Step 4

Take the canned air and blow dust off from around the slot and sides of the slide projector.

Advertisement

Pick up the slide and insert it back into the slide tray. Take the slide tray and put it back onto the slide projector. Jiggle the slide tray so that it is properly seated in the slide projector.

Step 5

Plug the power plug back into the AC socket for electrical power. Turn on the slide projector so that only the fan is on. Advance the slide tray so that a slide goes into the projector. Advance the slide tray again so that the slide exits the projector and another slide goes into the slot.

Advertisement

Reverse the slide projector to return to the first slide. Turn on the bulb of the slide projector. Advance the slide tray one slide at a time and watch the slides as they advance through the slide projector.

Video of the Day

Advertisement

Advertisement

references & resources

Report an Issue

screenshot of the current page

Screenshot loading...