How to Install Halo Projector Headlights

Halo projector headlights have a small ring around the main headlight projector that lights up when you turn on your headlights. These lights focus a beam of light onto the road as opposed to regular headlights that use a reflective backing on the inside of the headlight housing that scatters the light. When replacing your factory headlights with halo-style aftermarket headlights, you might need to buy new headlight bulbs that fit the new assembly, depending on your vehicle and the manufacturer of your new halo-style headlights.

Things You'll Need

• Halo projector housing with new halo bulb
• Screwdriver

Instructions

1. Open the hood and unscrew the retaining screws from the back of the headlight assembly.

2. Pull the headlight housing forward.

3. Disconnect the electrical power connector from the back of the headlight housing.

4. Remove the headlight assembly.

5. Slide in the new halo assembly.

6. Secure the halo headlight housing assembly to the frame using the factory retaining screws.

7. Connect the electrical power connector to the back of the halo headlight ballast.

References

• "How To Repair Your Car: Car-Care Tips, Simple Repairs, Driving & Maintenance Tips, and More ..."; Paul Brand; 2006
• "Auto Repair For Dummies"; Deanna Sclar; 1999