Before you can remove that vanity from your bathroom, you must first uninstall the vanity sink. Removing the sink from your vanity requires attention to detail, for there are some aspects of installing a sink that you may forget when you go to remove it.
Things You'll Need
- Rubber protective gloves
- Long-sleeved shirt
- Safety goggles
- Locking grips
- Plumber's wrench
- Utility knife
Shut off the water supply to the bathroom sink. If you cannot find a shutoff valve on each of the water feed pipes under the sink, then you will need to shut off the water to the entire house. The shutoff valve for the house can be found on the feed pipe in the basement just as it leads to the bathroom sink, or it is located near the water meter on the pipe that comes in from the city water supply.
Remove the flexible feed pipes that run from the water source in the wall up to the faucet in the sink. There will be connections at each end of each pipe that you should be able to turn by hand. If you cannot turn them by hand, then use a pair of locking grips to turn the connections.
Reach under the faucet assembly and remove the large nuts that are holding the assembly in place from under the sink. These nuts are normally found threaded around the base of each faucet. If they do not move by hand, then use a plumber's wrench to turn them. Detach the drain lift lever from the drain stop where they meet under the sink.
Remove the faucet assembly.
Remove the p-trap assembly that connects the drain to the wall. To do this, unscrew the connections at each end of the pipe. If these connections cannot be moved by hand, then use a plumber's wrench to move them.
Check to see if there is any caulk between the sink and the vanity counter top. If there is caulk, then run a utility knife along the caulk to cut it and free the sink from the counter.
Remove the sink from the vanity.
Tips & Warnings
- Have a bucket under the drain just in case anything starts to leak as you unhook things.
- Wear protective rubber gloves, goggles and a long-sleeved shirt when you perform this project to protect yourself from the possibility of spraying water, and always have a towel handy just in case. The rubber gloves can help you maintain your grip on tools if your hands get wet. Even when the water source is turned off you still may build up pressure in the water supplies. The goggles will protect your eyes if water suddenly shoots out due to pressure. The long-sleeved shirt will help protect your arm if hot water escapes and makes contact with your skin.
How to Remove a Bathroom Sink
You can learn how to easily remove your counter top or wall- mounted bathroom sink and save the money you would spend...
How to Install a Bathroom Vanity Sink
Installing a vanity sink can be a simple task provided you have all of the tools necessary. In this article I will...
How to Remove a Bathroom Vanity
If your bathroom remodeling plans call for a new vanity, one of your first jobs is removing the old one. The procedure...