There are countless uses for an extension cord and, often, their use is to power a string of holiday lights, yard fountains or a similar application where plugging and unplugging the cord is the only control available. An inline switch added to an extension cord can provide a safe control for such purposes. Numerous inline switch types are available at home improvement centers and hardware stores, and installation is easy.
Things You'll Need
- Utility knife
- 110-volt inline toggle switch
- Vinyl electrical tape
Mark cut lines on the cord at the desired location for the switch to ensure the switch assembly will cover exposed wires.
Score two cuts around the perimeter of the exterior vinyl or rubber sheathing of the extension cord with a utility knife, perpendicular to the length of the cord, slightly shorter than the length of the switch assembly. Only cut through the exterior plastic sheathing to the paper or cloth insulation layer, so as not to score internal wires.
Remove sheathing and insulation wrap from opening to expose internal wires. There will be three individual wires within the extension cord sheathing. Typically, one is white and one black, with a green ground wire.
Cut the black or white wire at the midpoint of the exposed section of cord and strip sheathing from both wire ends to expose approximately ½ inch of bare wire.
Attach the two ends of the cut wire to the two copper screws on the switch and tighten to secure.
Wrap electrical tape around the cord, beginning at approximately 1/2 inch from the cut opening in the cord, to cover exposed wires and both connections on the switch. Replace the switch cover and tighten the screws.
Plug the cord into the wall outlet. The switch will now control electrical flow to an appliance or tool.
Tips & Warnings
- Apply sufficient electrical tape to the switch location to cover and secure switch wiring and prevent risk of electrical shock or short.
- Photo Credit Creatas Images/Creatas/Getty Images
How to Install Feed Through a Cord Switch
Cord switches are easy to install and allow you to control lighting without resorting to inserting and removing the outlet plug. There...
How to Install a Switch on a Hanging Cord
In-line or feed-through switches installed on hanging cords make turning the light off and on more convenient. These types of switches can...
How to Wire a 3-Wire Extension Cord
Three wire extension cords have a heavy outer protective coating with three wires inside for positive, negative and grounding. Each internal wire...
How to Put an On/Off Switch on an Extension Cord
Installing an on/off switch on an extension cord requires using the correct type of switch. The type of switch needed accommodates a...
How to Wire a Foot Switch
A foot switch keeps the hands free while allowing someone, for example, a guitarist, to activate electronics devices at will. To wire...
How to Wire Electrical Extension Cord Plugs
Sometimes the plugs on your extension cords may bend or snap, requiring that you either purchase a new extension cord or replace...