How to Attach a Rope to a Carabiner
Whether you're sport climbing for the first time or leading the fourth pitch on an all-day route, few things are more important when you rock climb than properly attaching your rope to a carabiner.
Other People Are Reading
Instructions
-
-
1
Ensure you have good footholds and/or handholds so you can stabilize yourself to hold the rock with only one hand.
-
2
With your free hand, grab a carabiner from your climbing harness and clip it to the end of the climbing protection in a downward direction with the gate facing the rock.
-
-
3
Rotate the carabiner out and away from the rock so the gate is upside-down and facing you.
-
4
Move your hand down and firmly grasp the rope so that you have enough slack to reach the carabiner.
-
5
Using your index finger and pressure from the rope, push open the carabiner gate and insert the rope, making sure it is not touching or obstructing the gate.
-
6
Check the rope to make sure it will not knock you off the rock and that it slides smoothly in the direction of travel without twisting the carabiner.
-
7
Climb to the next piece of protection and repeat Steps 1 to 6 until you finish the climb.
-
1
Tips & Warnings
Inspect your carabiners often to make sure they are clean, have solid side-to-side rigidity when open, and open easily--even when loaded.
