How to Troubleshoot My 1984 Honda Accord When it Stalls

How to Troubleshoot My 1984 Honda Accord When it Stalls thumbnail
If a 1984 Honda Accord starts to stall, it requires immediate maintenance.

Honda Accords have earned a reputation as one of the most reliable car models in the world. The model has been around since 1976 and has continually evolved since then. The 1984 model introduced a new 1.8 liter engine that elevated the car's power to 86 horsepower. 1984 was the first model that used a catalytic converter as well. While these changes were well received, the Accord could still suffer from stalling problems. If a 1984 Accord starts to stall, it needs to be fixed before more serious problems result.

Things You'll Need

  • Flat-head screwdriver
Show More

Instructions

    • 1

      Record when the car stalls. This is the best way of locating what the cause of the stall is. If the car is always stalling when the engine is cold, it could be a defective airflow sensor. If it stalls while you are stopped at a red light or stop sign, it could be an issue with the battery or the A/C compressor. If it stalls randomly while driving, the problem could be ignition related.

    • 2

      Check your hoses in the engine for any signs of leakage or wear. The hoses in the Accord engine need to maintain a tight vacuum and if that vacuum is interrupted by a leak in a hose, the fuel/air mixture could be affected and result in a stall. If any leaky hoses are found or if the seals holding them in place are loose, they need to be replaced.

    • 3

      Inspect the carburetor. The '84 Accord did not have fuel injection and needed a carburetor to maintain a proper fuel/air mixture in the engine. If the car won't start unless there is gas poured directly into the carburetor, the fuel pump is not working and requires replacement. Most carburetors can be easily adjusted by turning two adjustment screws on it with a flat-headed screwdriver. Adjusting the carburetor in this manner can help prevent future stalling issues.

    • 4

      Replace the fuel filter. The carburetor can be opened by loosening a wing nut that holds the cover in place. Once the cover is removed, pull the fuel filter right out since there is nothing holding it in place. Drop a new one in and screw the top on again. If the filter is clogged, the carburetor may not be getting enough gas and the car could be stalling.

Tips & Warnings

  • Avoid taking your Accord on any long trips or driving it on the freeway until you know for sure the stalling issues have been fixed.

Related Searches:

References

  • Photo Credit yellow car, a honda japanese sport car model image by alma_sacra from Fotolia.com

Comments

You May Also Like

Related Ads

Featured