How to Set a Brookstone Projection Clock

Brookstone projection clocks display the time on a wall or on the ceiling. You can now lie awake at night and see the time without having to roll over or move your head. When an AC adapter is included, you can even leave the projector on all night, so that you can find out the time whenever you open your eyes. Some of the clocks will also display the room's indoor temperature. The Brookstone projection clock can be easily set.

Things You'll Need

• 3 AA Batteries

Instructions

1. Insert the batteries in the clock's battery compartment and press the "12HR/24HR" button to choose the time format. Press the Celsius/Fahrenheit button, marked "C/F," to choose the temperature format.

2. Slide the switch marked “Time Set/Alarm Set/Alarm On” to the "Time Set" position. Press the "HR" and the "MN" buttons to set the correct time.

3. Slide the switch to the "Alarm Set" position and press the "HR" and "MN" buttons to set the alarm time. Slide the switch to the "Alarm On" position.

4. Switch the "Always Bright" switch to the "ON" position. The switch is inside the battery compartment cover on the Brookstone projection clocks.

5. Plug the device into a power outlet. This will activate the "Always-on" functionality, if the clock has it. The projection will appear throughout the night.

6. Turn the lights off and place the device on a bedside table. Adjust the position of the time on the wall or ceiling by moving the projector forward or backwards. Focus the image using the projector focusing switch. It’s located on the right side of the clock.

Tips & Warnings

• Even if you use the power supply to keep the projector running constantly, you still need batteries to operate the clock itself.

References

• Brookstone Projection Clock Manual