How to Replace a Mitsubishi Eclipse Transmission Filter

by Robert GoodUpdated July 13, 2023

The transmission type in the Mitsubishi Eclipse is basically the same from one model to the next. The transmission filter is inside of the transmission. The transmission fluid must be completely drained from the transmission in order to access the transmission fluid filter.

Things You'll Need:

  • Jack
  • Jack stands
  • Drain pan
  • Ratchet set
  • Filter removal tool
  • New transmission filter

1. Raise the front end of the Eclipse using the jack and rest the front end on jack stands

Raise the front end of the Eclipse using the jack and rest the front end on jack stands. Get underneath the Eclipse and place the drain pan under the drain plate on the transmission.

2. Remove all the securing bolts from the transmission drain plate

Remove all the securing bolts from the transmission drain plate. Allow the fluid to drain as you are removing the securing bolts. Pull the drain plate from the transmission.

3. Look inside the transmission and locate the filter

Look inside the transmission and locate the filter. Connect the filter removal tool to the filter. Twist the filter loose and remove.

4. Insert the new filter into place and tighten

Insert the new filter into place and tighten. Place the drain plate to the transmission. Replace the securing bolts to the drain plate.

Video: WHERE IS THE AUTOMATIC TRANSMISSION FILTER LOCATED

Comments on this video:

  • Super helpful video thank you for the content. I went and bought a trans filter thinking I could do it, 2 hrs of googling and I couldn’t find anything helpful and now after watching your video I see why nobody changes a filter on 2015 edge. Thank you
  • Great mechanical knowledge and advice Thanks! Does a 2007 Mercury Milan Premier V6 with an F21 6speed automatic transmission have a filter and if yes how do I replace it myself.

More Articles

article divider
×