How to Fix a Patio Screen Roller Adjustment
Fixing the roller adjustment on your patio screen panel may require the replacement of the rollers. Just like on a sliding glass door, the rollers can wear out or break. If you have made several attempts to adjust the screen rollers, you will need to remove the patio screen panel and inspect the rollers. Due to the range of styles on the market, it will be necessary to take the old assemblies to a home improvement center when you go to purchase the replacements. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Open the patio screen half way and grab each side with your hands. Lift up and pull the bottom of the patio screen out of the lower track and toward you. Pull down to release the patio screen from the upper track. Lay the patio screen on a flat surface.
-
2
Inspect the rollers inside the bottom channel of the patio screen door panel. If the rollers have damage or show a lot of wear, replace the rollers. Insert a flathead screwdriver under the end of each roller to pry the roller assembly out of the door channel.
-
-
3
Take the old roller assemblies to the hardware store when you go to purchase new assemblies. Each manufacturer of sliding doors and sliding screen doors uses a different type of roller. You must get a set that matches your old ones.
-
4
Push the new assemblies into place in the bottom of the door channel. Find the adjustment screw on the outer edge or lower panel of the patio screen door. Turn the screw counterclockwise with a flathead screwdriver to engage the roller assemblies.
-
5
Spray a few shots of lubricant on the rollers if you are not replacing the rollers. The lubricant will make the rollers glide more freely.
-
6
Lift the patio screen panel into position and insert the top of the panel into the upper track. Push the bottom of the panel toward the door and set the rollers inside the lower track.
-
7
Adjust the rollers with the adjusting screw until the patio screen panel glides freely on the track.
-
1
