How to Change the Remote Entry Settings on a 2000 Cadillac Eldorado
The 2000 Cadillac Eldorado has several options for personalization. One of the options is for the remote keyless entry system. Depending on your settings, several things may happen when you press the "Lock" or "Unlock" button on your keyless remote. The Eldorado lets you customize the lights and sounds associated with your keyless remote. Changing your remote entry settings is simple and only takes a few minutes.
Other People Are Reading
Instructions
-
-
1
Insert your key into the ignition cylinder. Turn the key to ignition position "D" (Run), without starting the engine.
-
2
Press and hold the buttons labeled "Skip" (center of control panel) and "No/Info/Reset" (left side of control panel) for about ten seconds. You'll hear a chime and the display will change to personalization mode.
-
-
3
Press the "Yes/Trip/Reset" or "No/Info/Reset" button when the display shows "LIGHTS FLASH AT UNLOCK," depending on your selection. When activated, this feature makes your parking lights flash twice when you unlock your Cadillac with the keyless remote. After you make your selection, the display will automatically change to the next option.
-
4
Press the "Yes/Trip/Reset" or "No/Info/Reset" button when the display shows "LIGHTS FLASH AT LOCK," depending on your selection. This feature is the same as the previous one, except activating it makes the lights flash when you press "Lock," rather than "Unlock."
-
5
Press the "Yes/Trip/Reset" or "No/Info/Reset" button when the display shows "HORN SOUNDS AT LOCK," depending on your selection. When this feature is activated, the horn sounds when you press the "Lock" button on your keyless entry.
-
6
Press the "Yes/Trip/Reset" or "No/Info/Reset" button when the display shows "EXT LIGHTS AT UNLOCK," depending on your selection. When activated, this feature turns on all of your exterior lights (headlights, parking lights, turn signals, etc.) for 20 seconds after pressing "Unlock" on your keyless entry.
-
1
Tips & Warnings
None of the features override each other. You can have them all activated, or have them all deactivated.
