How to Add RAM to a Xerox 6180
Adding RAM to printers helps them capture more data about what they print. As a consequence, printing becomes faster, your printer can print larger files and your computer frees up a little more of its resources which it would otherwise have dedicated toward the printing queue. Large printers such as the Xerox 6180 printer have a panel you can open to add memory without having to do any complex modifications. You might find this upgrade as easy as installing your printer.
Other People Are Reading
Instructions
-
-
1
Remove the power cable from your printer and turn it off using the switch on the right hand side when looking from the front.
-
2
Turn the printer so that the rear end faces you and turn the little knob on the back panel to the right counterclockwise.
-
-
3
Open the panel's door.
-
4
Line up your memory stick so that the notch in it lines up with the one on the memory slot found on the lower right side of the panel.
-
5
Insert the memory at an angle and press it down firmly so that it snaps into the slot.
-
6
Close the panel door and turn the knob clockwise.
-
7
Connect the power cable to the printer and turn it back on.
-
1
Tips & Warnings
Make sure you use memory created specifically for your printer. Using other types of memory might not work or even fit in the slot designated on the printer.
Never operate on the printer with dirty hands. Residue from your hands might damage the internal components around the memory slot.
