How to Repair Lamp Switches

How to Repair Lamp Switches thumbnail
Don't throw out you lamp--fix it.

Lamp switches can wear out especially when you are constantly turning them off and on. You think you need to start shopping for another lamp that matches the one that just broke, but it is your favorite and not just any lamp is going to replace it. Don't throw out your favorite lamp just because the switch broke. Learn how to repair your lamp switch rather than toss it into the local landfill. Does this Spark an idea?

Things You'll Need

  • Screw driver
  • Interior socket
Show More
Brought to you by
Send to Phone

Please enter your 10 digit phone number only.

A link to this article has been sent to the phone number provided.

Reply HELP for help, STOP to end. Message and data rates may apply.

Instructions

    • 1

      Unplug the lamp from the electrical wall outlet.

    • 2

      Remove the lamp shade and the light bulb from the lamp. Remove the lamp harp (the piece that holds the lamp shade) from the lamp. The harp is held onto the lamp by tension only. Squeeze the harp sides towards each other and towards the lamp socket to release the tension and remove the harp from the harp bottom.

    • 3

      Remove the socket shell from the lamp socket. The socket shell slides over the interior socket and the turn knob. Pull straight up from the socket cap, or base, of the socket to remove the shell.

    • 4

      Disconnect the lamp wires from the interior lamp socket. The interior socket will be made of aluminum and plastic. Pull up on the interior socket to expose the lamp wires. Loosen the two screws on the interior socket and remove the wires from beneath the screws.

    • 5

      Replace the interior lamp socket. Connect the lamp wires to the new interior lamp socket by placing each wire under one of the screws and tightening the screws. It will not matter which wire is connected to which screw, so there is no need to worry as it will still work even if you mix the wires up.

    • 6

      Slide the socket shell down over the interior socket and the turn knob.

    • 7

      Replace the harp, light bulb and the lamp shade.

    • 8

      Plug the lamp into the electrical wall outlet.

Related Searches:

References

  • Photo Credit Lamp image by Emil Maga from Fotolia.com

Comments

You May Also Like

  • How to Fix a Lamp

    Fixing a lamp involves taking each piece of the lamp apart and checking for damage or wear that could be causing the...

  • How to Repair a Table Lamp Switch

    Table lamp switches are either located in the socket or on the lamp base. Repairing a table lamp switch by replacing it...

  • How to Fix a Lamp

    The most common problem with lamps is a faulty socket or switch within that socket. Loose or faulty wiring comes next. Use...

  • Installing Pulls & Knobs for Cabinets

    Installing pulls or knobs onto cabinet doors involves drilling a hole large enough to fit the knob screw through. Screw the knob...

  • How to Fix Touch Lamps

    Touch dimmers are operated by your body. Your body acts as an antenna, or conductor, and touching any part of the metal...

  • How to Fix a Table Lamp with a Bad Socket

    There is really no way to actually fix a bad lamp socket. The only repair that can be made, and to avoid...

  • DIY How to Repair a Lamp Switch

    Anyone with basic electrical skills has the DIY acumen necessary to repair a lamp switch successfully. The parts you will need are...

  • How do I Replace a Sony Xl-2400 Projection TV Lamp?

    The Sony XL-2400 Projection Lamp is used in Sony's KDF-55E2000, KDF-50E2000, KDF-46E2000, KDF-E42A10 and KDF-E50A10 LCD rear projection TV sets. All of...

  • How to Replace a Frigidaire Oven Knob

    Most Frigidaire ovens have a single control knob for setting the internal oven cooking temperature. Most oven knobs are simple pieces of...

  • How to Replace a Lamp Switch

    One way to extend the life of a lamp's on and off switch, is to turn the lamp on and plug it...

  • How to Repair a Wobbly Floor Lamp

    A floor lamp is one way to create extra light in a room and fill an empty space. Floor lamps have a...

  • How to Repair a Floor Lamp Fixture

    When a floor lamp stops working, there are usually two causes for the problem: a bad socket or a bad cord. Since...

  • How to Repair a Touch Lamp Switch

    A touch lamp is controlled by an interior switch connected to the lamp wiring and the lamp body. You switch the lamp...

  • How to Repair a Lamp Socket

    Many times a lamp will break at the switch. Turning the lamp off and on each evening can wear the switch out...

  • How to Fix a Broken Door Knob

    When a doorknob gets bent, stripped or otherwise stops working, your repair options will depend on what type of knob system it...

  • How to Fix a Lamp Switch

    If your favorite lamp no longer comes on when you turn the switch, or comes on and then goes off again, you...

  • How to Repair a Lamp Switch

    Lamps often break. Some fall and shatter, some can no longer sit upright and others will no longer turn off or on...

  • How to Repair a Touch Lamp

    A touch lamp utilizes a sensor that lets you turn the lamp on or off with the touch of your hand. It...

  • How to Replace an Oil Lamp Wick

    Oil lamps provide light without electricity by using a wick to absorb lamp oil and carry it from the lamp tank through...

Related Ads

Featured