How to Clean the Jets on a Jacuzzi

Cleaning Jacuzzi Jets

Jacuzzi tubs are much loved by their owners for their ability to release stress. Because they are so highly prized, it is essential to schedule a monthly cleaning to remove any film or debris in the tub. To reduce the amount of dirt that can accumulate, wash yourself off before entering the tub. In addition, avoid harming your Jacuzzi by refraining from adding bath soap.

Things You'll Need

• Liquid dish soap
• Towel

Instructions

1. Fill the Jacuzzi up with hot water that is at least to 140 F. You can use a thermometer or if your Jacuzzi has one built in keep an eye on how hot you make the water. Allow the Jacuzzi to fill to its capacity.

2. Pour into the tub 1/8 cup of liquid dish detergent. The dish soap is able to remove the hard water deposits and lime residue. Start the jets of the Jacuzzi.

3. Allow the jets to run for roughly 15 to 20 minutes. Check on the Jacuzzi to make sure that bubbles aren't spilling over the top.

4. Drain the tub. Turn on the cold water and allow to fill at capacity. Start the Jacuzzi jets.

5. Allow the tub to drain. Wipe the jets and tube with a soft towel to ensure that you do not scratch the surface.

Tips & Warnings

• Add your monthly Jacuzzi jet cleaning routine to the calender on your phone, so you don't forget.

• Avoid turning on the jets until the water has reached 2-inches above them.

References

• How to Clean It: How to Clean Jacuzzi Jets
• Jacuzzi: Resources