How to Connect an Above-Ground Pool Filter to the Pool

Maintain a clean pool by installing an above-ground filter.

A swimming pool's plumbing system is the most important aspect of maintaining clean and clear water. The plumbing system includes the pool skimmer, pump and filter. The pool filter removes dirt, debris, algae or particles from the water before passing it back into the pool. It's important that you install a pool filter for any above-ground pool to ensure the water is clean and sanitary. Installing and setting up a pool filter will help make the water inviting for your family and friends.

Things You'll Need

• Leveling tool
• Paving stones
• Pool hose
• Pool hose clamps
• Flat-head screwdriver

Instructions

1. Unplug the cord or turn the circuit breaker off to disconnect the power to the pool pump. This will prevent electric shock while the filter is connected.

2. Create a level area for the filter between the pool pump and the pool return jet valve, using paving stones and a leveling tool. The filter should be 2 to 3 feet away from the pump to ensure maximum efficiency.

3. Attach a piece of pool hose to the pool pump's outlet valve to the pool filter's inlet valve. The valves should be labeled. Secure each end of the hose with hose clamps and use a flat-head screwdriver to tighten each hose clamp, preventing leaks.

4. Attach another piece of pool hose to the pool filter's outlet valve and connect the other end to the pool return jet valve. The return jet valve is on the sidewall of the pool. Use two more hose clamps to secure both ends of the hose. Tighten the hose clamps with the flat-head screwdriver.

5. Restore power to the pool pump.

References

• Hayward Pool Products: Owner's Guide
• Hayward Pool Products: Above Ground Pools: Maintenance