Nissan Keyless Programming Instructions
In spite of how many Nissan models there are, one set of keyless programming instructions can be used for almost every model and model year of Nissan that has the keyless entry feature. Aside from knowing these instructions, you'll also need to understand that entering the programming mode deletes the car computer's memory of previous remote authorizations. Therefore, you'll need to program all remotes together in the same programming session for each of them to work again.
Other People Are Reading
Instructions
-
-
1
Close all of the doors. Lock them from the driver's door control panel.
-
2
Insert the ignition key and take it back out without turning it. Repeat this five more times in under 10 seconds. Don't do it too fast, though. If you are successful, the hazard lights will flash to confirm.
-
-
3
Insert and turn the ignition key to "ACC" without starting the engine.
-
4
Push the "Lock" button of the first remote to be programmed within five seconds. The hazard lights will flash to confirm you are successful.
-
5
Unlock and relock the doors from the driver's door console if you have any more remotes to program.
-
6
Press the "Lock" button on the next remote to be programmed within five seconds of programming the first remote.
-
7
Repeat Steps 5 and 6 for any additional remotes.
-
8
Remove the ignition key.
-
9
Unlock the doors using the driver's door console.
-
10
Open the driver's door to exit programming mode.
-
1
Tips & Warnings
If you are unable to program the remote, either find the directions in your owner's manual or log onto a website that offers keyless remote programming instructions for your particular model and year. A few models for the most recent years do not allow manual reprogramming; these require programming at the dealership, forcing you to pay upwards of $100 per key.
References
- Photo Credit keyless remote image by Ray Kasprzak from Fotolia.com
