How to Reset Samsung TV Firmware
Televisions have changed since the day when only an authorized technician could update the operating system the TV used. Updating the firmware on a Samsung Plasma TV can be done by the owner, but problems can develop if the Samsung is accidentally turned off or the electrical power fails while the update is being made. Resetting the firmware becomes necessary as otherwise the Samsung Plasma TV will no longer turn on or off. The owner can reset the firmware using the same firmware update that caused the problem. It will only take a couple of minutes to get the Samsung Plasma TV working properly again.
Other People Are Reading
Instructions
-
-
1
Remove the USB flash drive firmware update from out of the USB port on the Samsung Plasma TV.
-
2
Unplug the Samsung Plasma TV from the electrical socket. Count to ten slowly.
-
-
3
Insert the USB flash drive firmware update back into the USB port on the Samsung Plasma TV.
-
4
Plug the Samsung Plasma TV's power cord back into the electrical socket for power.
-
5
Press and hold in the Power button on the Samsung Plasma TV for two or three seconds before releasing it.
-
6
Wait as the firmware upgrade notification screen appears on the Samsung Plasma TV. Wait as the firmware upgrade resets the Samsung Plasma TV and runs for about a minute.
-
7
Wait as the firmware upgrade finishes and turns the Samsung Plasma TV off and then on again. Watch the Samsung Plasma TV now that it has been reset with the firmware. Turn off the Samsung Plasma TV when you are done watching.
-
1
Tips & Warnings
Plugging the Samsung Plasma TV into a uninterruptible power supply (UPS) will keep the Samsung from losing power due to an electrical outage or other type of power failure.
You will have to contact Samsung's U.S. Customer Care line for assistance (800-726-7864) if the Samsung Plasma TV refuses to update the firmware and return to its normal operation.
References
Resources
- Photo Credit tv control and tv 3 image by chrisharvey from Fotolia.com
More Like This
Comments
-
Hello.. i've a problem with a Samsung LE32C630.. in service menu I've changed model to c6600 but I want to reset all correction 've done to the original factory model and settings.. Ive done also restore factory settings in service menu but model remain the same and I'm unable to change it..Help me.. @[661712701:2048:Antonio Manni]
