How to Assemble a Showerhead

Assembling a shower head is a simple home improvement task. The entire process takes a few minutes to complete and requires only a few basic tools. New shower heads will make your showers more enjoyable because there will be no clogs from calcium buildup or leaks that might have occurred with the old version.

Things You'll Need

• Soft cloth
• Pliers
• Teflon tape
• Shower head

Instructions

1. Remove the old shower head. Place a soft cloth around the shower head and twist counter-clockwise until the shower head is off of the shower pipe.

2. Wipe the threads using the cloth. Wrap four inches of Teflon tape around the shower pipe. This will help prevent leaking.

3. Screw the new shower head in place by twisting it clockwise until it is firmly on the shower pipe. Place the cloth around the shower head bolt and use the pliers to twist the bolt until it is tight.

4. Turn on the shower and inspect for any leaks. If there are leaks in between the shower head and the shower pipe, remove the shower head, re-apply the Teflon tape and start the process over until no leaks occur.

Tips & Warnings

• 1. When applying the Teflon tape, wrap the tape firmly so it molds into the threads of the shower pipe.

• 1. Protective gear should be worn during all home improvements. Glasses and gloves are recommended.

References

• Shower Head Resource: "How to Install a New Shower Head"