How to Attach an Exterior Window Shutter
Exterior shutters add to the aesthetic quality of your house. They complement the exterior of the house by providing additional style, texture and color. They are not difficult to install, although the job is easier if you have a helper. Shutters are either stationary or movable. Stationary shutters are installed directly on the wall with screws. Movable shutters require hinges, but the installation process is basically the same. Shutters are made from a variety of materials. Wood and vinyl are the most popular. Vinyl shutters are the most durable and require little maintenance. Does this Spark an idea?
Other People Are Reading
Instructions
-
-
1
Hold and align the shutter to the side of the window. Shutters typically have six pre-drilled holes for screws. The number of holes will vary depending on the size of the shutter. While holding the shutter against the wall, insert a pencil through the holes and mark the wall where the screws will go. If your shutters do not have holes. you will have to drill them yourself with a 1/4-inch drill bit.
-
2
Drill a 3 1/4-inch hole in the wall for each of the screws. If the house has wood siding, you may need to drill a pilot hole. With wood-based siding or plywood, you can drill directly into the siding. Stucco or brick walls require a masonry bit to drill the hole and an anchor to hold the screw.
-
-
3
Put the shutter in place and insert the screws. Put a little bit of caulking around the screw to prevent moisture problems. Tighten the screws so that the shutter fits snug against the wall
-
4
Add the finishing touch. Many shutters now come with screw caps or covers that will hide the screw from sight. Once the shutter is installed, place the cap over the screw. If your shutter does not come with caps, you can lightly paint the head of the screw with a color that matches the shutter.
-
1
