How to Install a New Shower Curtain Rod & Shower Curtain?

Installing a new shower curtain rod and shower curtain can help transform a bathroom with a completely new look without a major renovation expense. This low budget makeover can be changed seasonally or whenever the need arises. You don't need any tools to complete this project, simply purchase the necessary items.

Things You'll Need

• Tension rod
• Shower curtain
• Shower curtain hooks

Send to Phone

Brought to you by

Send to Phone

Please enter your 10 digit phone number only.

Send

A link to this article has been sent to the phone number provided.

Close

Reply HELP for help, STOP to end. Message and data rates may apply.

Instructions

1. Hold the tension rod at the top of the shower and begin to twist the rod until the ends meet the wall. Tension rods are spring loaded so you will need to twist until you have a tight and secure fit.

2. Add the shower curtain hooks to the tension rod. The number of hooks will depend on the shower curtain. It is easier to add the hooks after the rod is in place, so they don't fall off during the installation process.

3. Hang the shower curtain on the hooks. Once in place, move the shower curtain to the length of the shower walls to insure water does not escape.

Tips & Warnings

• Tension rods come in various lengths and colors. A typical shower rod is five feet long. Choose a length at least two inches longer than the length of the shower area, in order to secure a firm fit. Be sure to measure the length of the tub wall before buying a rod.

• Most decorative shower curtains do not include a water resistant liner. A protective shower curtain liner may be needed to add an additional water barrier, and can be purchased at your local homeware store.

• Beware of placing heavy towels or clothing on the tension rod, as this can cause the rod to become loose. If this happens, twist the tension rod tighter in place.