How to Change the Toner on a Samsung ML-2510
The toner cartridge in your Samsung ML-2510 Monochrome Laser Printer is designed to last approximately 3,000 pages. The length of time will vary considerably depending on its usage or workload. When it's time to replace the toner cartridge, the ML-2510's service LED will illuminate and blink red. The message display may also notify you that the toner cartridge needs replacing. Installing a new toner cartridge in the ML-2510 is a fairly easy procedure.
Other People Are Reading
Instructions
-
-
1
Purchase a replacement toner cartridge with part number ML-2010D3.
-
2
Lower the front service panel to access the toner cartridge. Push the toner handle down, and then use the handle to remove the old toner cartridge.
-
-
3
Open the replacement toner cartridge package. Use your hands if at all possible, but if you must use a knife or scissors, be very careful not to damage the cartridge.
-
4
Shake the replacement toner cartridge vigorously for five to six seconds. This helps distribute the toner and maximize its capacity.
-
5
Remove the packing tape from the toner cartridge.
-
6
Insert the replacement toner cartridge into its mount. Use the handle to push it all the way in, then flip the handle up and close the service panel.
-
1
Tips & Warnings
Be careful when handling the toner cartridge. If it gets on your hands or clothes, wash them in cold water.
Consider recycling your old toner cartridge. Most major office supply stores, including Office Depot and Office Max, accept old toner cartridges.
