How to Change the Oil in a Troy-Bilt Lawn Mower

A Troy-Bilt lawn mower needs to have its engine oil changed each spring before it is used. Changing the oil is part of the routine maintenance that will ensure that your Troy-Bilt will receive the proper amount of lubrication it needs every year. This will help prolong the life of the unit and ensure that it is operating efficiently at the beginning of each season.

Things You'll Need

• Catch basin
• Wrench
• Vise grips
• Funnel
• Engine oil

Instructions

1. Place a catch basin or other type of container under the drain plug of the oil reservoir. Pull out the dipstick and remove the drain plug from the bottom side of the oil reservoir with a wrench or pair of vise grips.

2. Let the oil from the reservoir drain into the catch basin, then replace the drain plug.

3. Place a small funnel into the reservoir opening for the dipstick and add the oil, checking the level with the dipstick. Stop adding oil when the level reaches the "Full" line on the dipstick.

4. Remove the funnel and replace the dipstick to complete the project.

Tips & Warnings

• Refer to the owners' manual for the specific type of oil needed for your Troy-Bilt.

• Store the used oil or take it to a recycling center, such as an AutoZone, for disposal.

• If you do not completely fill the oil reservoir, the engine can overheat.

References

• Troy Bilt: Getting Your Mower Ready for Spring

Resources

• Troy-Bilt