How to Replace RV Water Heater Elements

There are many ways to heat your RV water heater.

RVs, especially if they are smaller, need to conserve as much space as possible. This can leave little room for heaters. On the other hand, RVs are not large and can be heated with much less energy than a home. Some RVs have electric heating elements attached to walls, the ceiling or floor. These elements work like light bulbs except instead of light they give off heat. It is one of the best ways to make your RV green. RV Water heater elements specifically work to heat up the water heater. When they malfunction or wear out, replace them yourself.

Things You'll Need

• Multimeter
• Screwdriver

Instructions

1. Turn the water heater off or check that it is off.

2. Locate A/C wires to the heater and disconnect the wires.

3. Check the element for continuity with the multimeter. If it is burned out, proceed to Step 4.

4. Remove the four screws with a screwdriver and remove the element. Place the new on in its place and screw the screws in. You may have a different type of element; see Step 5 for more information.

5. Remove the bolts with a specialized tool available at your local RV supply store. Place the new element in its place and screw the bolts in.

References

• RV.net: DIY -- RV Water Heater Replacement