How to Remove the Bumper Cover on an Acura Tl 2002

The bumper cover on a 2002 Acura TL is bolted to the metal bumper and bumper guard. The bumper cover is made of polyurethane to help protect against minor dents caused by rocks and other flying debris during driving. Polyurethane is also lighter than steel and very durable. However, when the bumper cover cracks, you will need to replace it. Replacement bumper covers can be purchased from most auto paint and supply stores. Once you have the new bumper cover, you'll need to remove the old cover from your Acura TL.

Things You'll Need

• Jack
• Jack stands
• Socket wrench
• Socket set
• Screwdriver

Instructions

1. Raise the Acura TL onto jack stands. Lift up on the front jack point of the Acura located behind the radiator. Place jack stands underneath the pinch welds of the TL and lower the vehicle onto the jack stands.

2. Climb under the vehicle and loosen the screws that hold the bumper cover to the inner wheel liner in the wheel wells using a screwdriver.

3. Unbolt the bolts that hold the bumper cover to the bumper and bumper guard using a socket wrench.

4. Pull the bumper cover down and away from the bumper.

References

• "Acura TL Repair Manual 1999-2008"; Rob Maddox, John H. Haynes; 2009