How to Clean a Dacor Gas Cooktop


Once you have installed a new Dacor gas cooktop, you will want to keep it in pristine condition for as long as possible. Older cooktops can also look brand new if cleaned daily, and keeping appliances clean extends their practical lifetime. A few minutes of cleaning will preserve that new look for many years.

Things You'll Need

  • Toothbrush
  • Stiff wire
  • Papercliip
  • Rubbing alcohol
  • Soapy water
  • Nonabrasive pad
  • Steel wool
  • Mild abrasive cleaner
  • Stainless steel cleaner
  • Cloth
  • Dishwashing liquid

Grates and Tray

  • Disconnect the power cord from the outlet before cleaning.

  • Remove the grates and spill pans. Clean the grates in soapy water using a clean rag. Normal dirt and grime that has not dried and hardened can often be removed easily.

  • Eliminate stubborn stains from the grates and spill pans by scrubbing with a nonabrasive pad that has been soaked in a mixture of warm water and grease-cutting dish detergent. Dry the grate and spill pan thoroughly.

Burner Components and Igniters

  • Remove the burner caps and burner rings from each burner assembly.

  • Examine the igniter, the metal top and the base for dirt. Use a firm toothbrush to clean these areas. Water cannot be used to clean the igniter.

  • Remove debris from the burner rings with a stiff wire or straightened paper clip. Use caution to not distort the shape of the ring holes.

  • Clean the removed burner parts and bases with rubbing alcohol. Use a stiff toothbrush to loosen dirt and rinse the parts with clean water. Dry all parts completely before replacing on the cooktop.

  • Replace all parts, and turn the burners on to test them. Reposition the components and check for dirt if the flame is uneven.

Stainless Steel and Other Surfaces

  • Clean stainless steel with Dacor stainless steel cleaner. Apply the cleaner with a soft cloth and wipe to a shine.

  • Use a mild detergent and water to clean stainless steel areas of the cooktop as an alternative to using the stainless steel cleaner. Rinse the surface using a clean moist rag, then dry with a lint-free cloth.

  • Use mild detergent and water to clean brass, chrome and copper surfaces. Rinse off the the detergent mix, then dry with a lint-free cloth.

Knobs and Trim

  • Remove the knobs by first setting them at the off position. Grip the knob and pull straight out.

  • Wash the knobs using dishwashing liquid and warm water. Do not soak the knobs or place in the dishwasher.

  • Clean the edges of the trim rings with a soft damp cloth. Avoid getting moisture behind the trim ring.

  • Dry the knobs and replace them in the off position.

Tips & Warnings

  • Wipe down the stove after each use to remove splatters crumbs, cleaning obvious spills immediately.
  • Always have the burner knobs set in the off position while cleaning.
  • Never attempt to clean a hot grate.
  • Never steam clean the cooktop, as steam can penetrate electrical components and cause a short circuit.

Related Searches


Promoted By Zergnet


You May Also Like

  • How to Clean Stainless Steel Gas Grills

    Stainless steel gas grills are great-looking grills that perform exceptionally well, especially during the summer months when all you want to do...

  • How to Clean a GE Profile Cooktop

    GE Profile cooktops are either gas tops, electric smooth tops or induction smooth tops, which use electromagnetic energy for heat. Like electric...

  • How to Clean a Kitchen Aid Cooktop

    KitchenAid electric cooktops are designed to be easier to clean than their traditional counterparts because they use a flat ceramic glass cooking...

  • Dacor Cooktop Problems

    For homeowners with smaller kitchens, owning a Dacor-brand cooktop can be an ideal way to organize your space. Because it is not...

  • Features of a Gas Cooktop

    Homeowners get to choose between using a gas and an electric cooktop. Gas cooktops require a gas line. The gas cooktops require...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!