How to Connect the Kinetic KA-6100

By Matt McGew

The Kinetic KA-6100 is a multi-channel surround-sound speaker system. This high-end speaker system features 1000-watts of power, five surround speakers and one subwoofer. When connecting this system, use the high-quality, low-gauge speaker wire included with the speaker system. Don't use shielded cables or other types of speaker wire or you can damage the speakers and your amplifier.

Step 1

Connect each speaker wire to the input port on the back of the LA-6100 speakers. One end of the speaker wire will contain a 1/4-inch jack that snaps into the input on the back of each speaker.

Step 2

Strip 1/4 inch off both wires at the other end of the speaker wires using the wire strippers. At the end of each speaker wire, you'll have a copper and a silver wire.

Step 3

Connect each of the speaker wires to the appropriate speaker port on the amplifier. For example, connect the right-front speaker wire to the right-font speaker input on the amplifier. The copper speaker wire should connect to the "+" input for the speaker on the amplifier. The silver speaker wire should connect to the "-" input for the speaker on the amplifier. Repeat until you've connected all speakers, including the subwoofer to the amplifier.

×