How to Tighten a Lever Door Handle
A loose doorknob of any kind is a nuisance, and if left unfixed, it will eventually fall completely off the door. When dealing with a lever door handle, fixing the problem will require only the most basic of tools and about 10 minutes of time. Levers handles slide onto a rod assembly with a set screw. This screw fits in a groove on the round lever rod. A loose lever requires some readjustment to properly fit into the rod assembly. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Screwdriver
- Allen wrench
Please enter your 10 digit phone number only.
A link to this article has been sent to the phone number provided.
Instructions
-
-
1
Determine whether you will need an allen wrench or a screwdriver based on the style of set screw, which you will find on the bottom of the door lever. Remove the screw, and slip the lever handle off the rod.
-
2
Inspect the rod's surface, and locate the groove where the set screw needs to be secured. Replace the handle, aligning the set screw hole with the groove.
-
-
3
Reinsert the set screw and tighten firmly with the allen wrench or the screwdriver.
-
4
Repeat this process on the opposite side of the door lever to insure a tight lever door handle.
-
1
Tips & Warnings
Take care when dealing with set screws as they are small and can easily be stripped.
If set screw is stripped, bring it to a hardware store to use as a template to replace the screw.
