How to Glue Veneer to Particle Board
When you glue veneer to particle board, you get the beautiful high quality look of expensive solid wood for any woodworking project at a reduced cost. Even beginners who have never attempted to reduce their material costs by using veneers and who do not have a vacuum press are pleasantly surprised to find that high-solid adhesive glues are perfect for forming a strong permanent bond between paper backed or 2-ply veneers and particle board. You can get the look of solid wood for the cost of the veneer, particle board and a few other inexpensive items. Does this Spark an idea?
Other People Are Reading
Things You'll Need
- Particle board
- Damp cloth
- Veneer
- High-solid water-based contact cement
- Glue roller
- Veneer scraper
- Veneer trimming tool
Instructions
-
-
1
Clean the particle board surface by wiping it with a damp cloth. Allow it to dry for 30 minutes.
-
2
Remove the plastic covering from the veneer and place it with the back up on a clean dry surface.
-
-
3
Shake the container of high-solid contact cement adhesive gently.
-
4
Apply one even coat of high-solid contact cement adhesive to the particle board and to the back of the veneer with a glue roller.
-
5
Allow the adhesive to dry for 25 to 35 minutes. The adhesive is dry when the surfaces appear clear and glossy. If any cloudy areas remain, the adhesive is not dry. If any dull areas remain, apply additional adhesive and allow it to dry to a clear and glossy finish.
-
6
Position the veneer over the particle board and carefully place it in position.
-
7
Bond the veneer onto the particle board by applying steady pressure to a veneer scraper against the entire surface. Work with the grain and from the center out.
-
8
Trim the excess veneer with a veneer trimming tool. Start from the outside and work toward the middle of each side.
-
9
Allow the contact cement to dry for at least 24 hours before completing your project.
-
1
Tips & Warnings
A second piece of particle board that is the same size can be placed on the glued veneer while it dries.
Do not use water-based finishing projects on your veneer.
