Rubber backing is great to keep scatter rugs in place, but rubber breaks down over time. It is susceptible to damage from chemicals and heat present in the wash and dry cycles of modern appliances, the constant wrinkling and smoothing from foot traffic, and even exposure to ultraviolet light indoors and out. The tops of rugs generally last much longer than the backing, though, so if you are not ready to throw out the rug, simply repairing the backing will give the rug many more years of use.
Things You'll Need
- Laundry detergent
- Liquid latex rubber
- Paint stir stick
- Bristle brush (2-inch, disposable)
Wash and rinse the rug using as little detergent as possible to get it clean. Do not use fabric softener or other additives in either the wash or rinse cycles. Hang the rug to dry.
Lay the rug upside down on a stable, flat surface where it can remain for at least 24 hours undisturbed. (The room should be warm--at least 65 degrees F--for the latex rubber to cure properly.)
Brush or cut away any scraps of old backing, string, etc., from the rug so the surface is as smooth as possible.
Open a can of liquid latex rubber and stir carefully to mix contents that may have settled.
Dip a brush into the liquid latex, and apply a generous coat to worn areas of the backing to consolidate any flakes and cracked areas. If whole areas of backing are loose but still attached, coat the area beneath the damaged portion with a thin coat of latex and press the old backing down over it. (The latex acts as a glue.) Allow the latex to cure for several hours (until it is solid and not sticky).
Apply an additional coat of liquid latex over the entire back of the rug to make a single, uniform surface over repaired areas. Allow to cure as before--preferably 24 hours before using.
- Photo Credit Hemera Technologies/PhotoObjects.net/Getty Images
How to Wash a Rubber-backed Rug
Rubber-backed rugs are easy to maintain and will last years if cleaned properly. Avoid heat, bleach and harsh detergents and the dryer.
How to Install Rubber Back Carpet
Rubber backed carpet is different than traditional woven backed carpet because it comes with its own rubber pad on the underside. This...
How to Paint the Back of Vinyl Floor Covering to Make a Rug
Painted vinyl and linoleum rugs follow a long tradition of using extra existing or used materials in new ways. Waste is a...
How to Fix Wool Area Rugs
Area rugs are designed to be functional and decorative, complementing the room's furniture and over-all design, while protecting carpets and floors from...
How to Put Backing on Rugs
Applying backing to rugs not only helps them become softer underfoot, it also prolongs the life of the rug and helps to...
How to Remove Rubber Backing From Throw Rugs
Many throw rugs are made with a secondary latex or rubber backing. The backing provides the rug with a non-slip surface that...
The Use of Latex Adhesive in Carpet Backing
Carpet surface fibers may be nylon, olefin, wool, polyester or some combination of these. Carpeting for your home or business is tufted...