How to Make an Easy Rabbit Fence

Save

Rabbits can easily destroy a vegetable garden or flower bed. Putting in a rabbit fence is the only effective way of protecting your plants against rabbits. Other methods, such as rabbit repellants or scare devices, can work temporarily but not reliably in the long term. Cottontail rabbits are most widespread, while larger jackrabbits live in the western U.S. Small brush rabbits live in Pacific coastal states. Because rabbits can't climb and they don't leap high, rabbit fences don't have to be tall.

Getting Started

  • First, make sure that rabbits are the only animals you need to exclude. Many kinds of animals work at night, so it's sometimes hard to identify culprits. A rabbit fence won't keep out raccoons or deer, so use clues, such as footprints or droppings, for identification. Then, determine what area you want to fence against rabbits. Using 6-inch-long wooden stakes, put a stake in each corner of the area and stretch string between them. Then dig a 6- to 8-inch wide and 6-inch deep trench under the string with a garden spade.

Putting in Posts

  • If cottontails or brush rabbits are the only rabbits you need to keep out, choose wooden 2-inch posts that are about 3 1/2 feet long. To keep out jackrabbits, you'll need 4 1/2-foot-long posts. Using a mallet, drive a stake in the ground in each corner, putting it about 8 inches into the ground past the depth of the trench. If the sides of the fenced area are long, add posts about every 4 feet, evenly spaced between the corner posts.

Installing Fencing

  • Rabbits can chew through plastic and wooden fencing materials, so you'll need 48-inch-wide wire fencing such as 1-inch mesh poultry netting. Any fencing should extend 2 feet above ground for cottontails and brush rabbits and 3 feet above ground for jackrabbits. Wear gloves to protect your hands while working with wire mesh. Unroll the fencing and stretch it tightly against the posts. To keep rabbits from digging under the fence, bend the bottom 6 to 10 inches of wire against the bottom of the trench to form a J or L shape with the edge pointing outward to keep rabbits out.

Making a Gate

  • For 2-foot-tall fences, simply step over the fence, taking care not to trip. To bring in tools or wheelbarrows or for the jackrabbit fence, create a 4-foot-wide gate in the last section of poultry netting installed. After pulling the last length of netting to meet the final corner post, cut the wire where it meets the post. With the last portion flattened against the ground, place the cut wire edge between two 2-foot-long wooden one-by-two furring strips and nail them together. This forms the gate's edge. Then, measure back 4 feet from the furring strips along the bottom edge of the wire and make an 8-inch-long cut in the bottom edge. So this flap isn't buried, roll it so it's at ground level. Fasten the gate edge to the corner post with two bungee cords at the top and bottom.

Finishing Up

  • Finally, fill the trenches and fasten the wire to the posts. Lengths of baling wire or plastic cable ties work well for fastening the poultry wire at 1 inch above the soil, again at about the poultry netting's midpoint, and about 4 inches from the top. Check the fencing regularly to make sure it hasn't been damaged.

References

  • Photo Credit Lightwriter1949/iStock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • Fence Post Spacing Guide

    Fences are supported by a series of posts buried in the ground, which provide stability as well as hold up the barrier...

  • How to Make a Paper Fence

    Crafts are a fun way to spend time with children and paper crafts may be the most affordable of all. It is...

  • Requirements for Rabbit Fences

    Rabbits. While some might think they are cute and cuddly, they can be annoying backyard pests. Whether they consistently eat produce from...

Related Searches

Check It Out

How to Make a Vertical Clay Pot Garden

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!