How to Build a Frog Trap


The easiest way to trap a frog is through the use of a drift fence. Many scientists or hobbyists use drift fences to study various animals in an area. For this trap, the fence will be a board that will create a block in a frog's path, at which point it will move along the board in an attempt to get around the blockade. The frog will continue moving until it falls into a bucket placed in the ground at either end of the board, thus trapping it until you return to check on the trap.

Things You'll Need

  • Shovel
  • Two 5-gallon plastic buckets
  • Plywood board
  • Knife or wire cutter
  • Hammer
  • Nail
  • Stakes (optional)
  • Use the hammer and nail to poke several small holes on the bottom of each bucket so that water does not fill the bucket in the event of rain. Make one 4-inch deep slot on the rim of each bucket. The slot should be the same width as the thickness of the plywood.

  • Select an area to set your trap. Dig a hole the size of one of your buckets and place the bucket inside. Adjust the hole's depth so that the bucket's rim is even with the ground. Fill the area around the bucket with dirt so there are no gaps.

  • Start at the spot where the slot on the embedded bucket is and dig a trench 4 inches deep. Make the length of the trench a few (around 3 or 4) inches shorter than the length of the plywood.

  • Dig another hole at the end of the trench and place the second bucket in the hole as in Step 2. Rotate the bucket so that the slot is aligned with the trench.

  • Place the plywood in the trench so that it stands upright and rests in the slots on each bucket. Fill the trench up around the plywood for more support. If necessary, hammer in stakes along the plywood to help stabilize it. Leave the trap overnight and check it in the morning for frogs.

Tips & Warnings

  • Try to select and use an area that has been verified to have many frogs. Areas near ponds, streams, rivers and lakes are ideal.
  • Any bucket size is OK, but larger buckets are better to ensure the frog doesn't escape.
  • You can place lights near the buckets at night to attract frogs to your trap's location.
  • Animals other than frogs may fall into the trap. Use caution when handling unknown animals.
  • Don't leave the trap unattended for long periods of time, as animals that fall in are susceptible to starvation or death by overexposure to weather elements.

Related Searches


  • Photo Credit Hemera Technologies/ Images
Promoted By Zergnet



You May Also Like

  • How to Catch a Tree Frog

    Tree frog is the common name for two frog families that have sub-families and genera all over the world. Tree frogs often...

  • How to Catch a Toad

    A toad is a helpful addition to your yard. These hoppers can consume 85 houseflies at one sitting. Keep one or two...

  • How to Make a Homemade Mosquito Killer

    Mosquitoes are not only annoying pests; they also have been known to spread diseases, especially West Nile virus. Mosquitoes are initially attracted...

  • How to Build a Frog House

    Building a frog house is a way to invite frogs to visit and set up residency in your yard. The concept is...

  • How to Make Fun Homemade Spider Traps

    Trapping spiders for observation or for spider control can be easily done with simple materials. You can reduce the number of spiders...

  • How to Trap a Bullfrog

    Bullfrogs are a species native to the United States and Canada. They live in damp habitats, such as rivers and ponds, and...

  • How to Make a Homemade Rabbit Trap for Kids

    Country kids know the joys of particular activities, such as fishing, watching birds, climbing hills, chasing frogs and catching rabbits. Impart country...

  • How to Make a Rabbit Trap

    One way to make a rabbit trap is with a box, a piece of string and a few carrots. Learn about getting...

Related Searches

Check It Out

How to Build and Grow a Salad Garden On Your Balcony

Is DIY in your DNA? Become part of our maker community.
Submit Your Work!