As a key component of a microwave oven, the magnetron creates the microwaves. Microwave ovens work by shooting waves of energy into the foods and drinks. Then, the water molecules in foods and drinks absorb the energy of the microwaves and get hot. Without a properly functioning magnetron, the oven cannot heat or cook. Test the magnetron to ensure that it works as expected.
Things You'll Need
- Well-insulated screwdriver
- Masking tape
- Fine-tip permanent marker
Discharge the microwave's capacitor. Unplug the microwave, then touch one end of the screwdriver to one of the chassis terminals and slowly slide it to the second chassis terminal. Hold the screwdriver at the second chassis terminal for a few seconds. Expect to hear a popping noise.
Use the screwdriver in the same manner to create a short-circuit between the capacitor terminals and the chassis.
Identify the magnetron and then place masking tape on each wire and label it. Record on the masking tape where each wire goes on the magnetron.
Touch each probe on the ohmmeter to the terminals on the magnetron, while having the ohmmeter set on the lowest resistance scale. Each probe touches one terminal at a time. Note that the readings on your ohmmeter for each probe should be less than 1 ohm.
Touch one of the ohmmeter's probes to a magnetron's terminal, while at the same time touching the other probe to the magnetron's metal housing. This time, though, have the ohmmeter set to the highest resistance scale. Do not allow the probes to touch one another. Record the reading from the ohmmeter--which should be infinity, if the magnetron works.
Tips & Warnings
- If the results of your ohmmeter readings are not what they should be, then your magnetron is likely not functioning. Replace the magnetron or invest in a whole new microwave.
- Be sure to unplug the microwave and discharge the capacitor. Otherwise, an electric shock may occur.
- Photo Credit Zedcor Wholly Owned/PhotoObjects.net/Getty Images
How to Change the Magnetron in a Whirlpool Microwave Oven
The magnetron in a Whirlpool microwave oven transforms high-voltage electricity into the microwave energy that heats the food in the microwave. A...
How to Troubleshoot a Maytag Microwave
Your Maytag microwave has a problem and you don't know how to fix it. Before you call the dealer or the repairman,...
How to Test a High Power Diode
Defective high power diodes are a common problem with microwave ovens. These diodes play a critical role by changing the high voltage...
How to Test a Briggs Coil
Keeping a good running engine depends on good fuel, mechanical and ignition systems. Problems can sometimes occur that point to a bad...
How to Test Microwave Ovens
Testing a microwave oven involves making sure the unit is working properly. You can run your own series of basic tests in...
How to Troubleshoot a Magnetron
The magnetron in your microwave is one of the most important components of the unit. The magnetron is made out of a...
How do I Replace a Frigidaire Magnetron?
Frigidaire microwaves are used to cook food quickly by the use of heat induction. If your Frigidaire microwave is not cooking your...
Description of a Magnetron Ignition
The Magnetron ignition coil was produced by Briggs & Stratton as its first fully electric ignition system. These systems began to replace...
Can Magnetrons Be Replaced in Microwaves?
In a microwave oven, it's the magnetron tube that creates the electromagnetic waves necessary to heat the food placed in it. Those...