How to Replace Damaged Cedar Shingle Siding
Cedar shingle siding has a unique, rustic look, but it can become damaged easily. Wind, rain and other weather conditions can cause siding to crack or split. Replacing damaged cedar shingles does not take long, but it requires careful attention to detail to make sure that the new shingles match the old shingles. Does this Spark an idea?
Things You'll Need
- Chisel
- Claw hammer
- Replacement shingles
- Roofing nails
- Caulk
- Paint or stain (optional)
Please enter your 10 digit phone number only.
A link to this article has been sent to the phone number provided.
Instructions
-
-
1
Use a chisel to remove the damaged cedar shingles. Pry them up and remove as much of the damaged shingle as possible.
-
2
Pry up remaining nails using a claw hammer, and remove any additional pieces of the old shingle that come loose in the process.
-
-
3
Slide the replacement shingle into place, making sure that it aligns with the adjacent shingles. There should be at least 1/4 inch space left between cedar shingles to allow for expansion due to moisture.
-
4
Nail the new shingle into place, using three nails--one on either side and one in the center of the shingle.
-
5
Cover the nail heads with caulk, and paint or stain the caulk as needed to match the rest of the siding.
-
1
Tips & Warnings
To avoid splitting, drill holes before inserting the nails, rather than hammering the nails in directly.
Use high-quality latex-based caulk if it will need to be painted. Otherwise, use silicone caulk, which usually comes only in clear, white and grey.
Make sure that the chisel does not damage adjacent shingles during the prying process.
