Fiberglass shower bases, which are the bottom sections of single showers, are constructed by applying layers of fiberglass mat and resin to the surface of a mold. The fiberglass will form to the mold and become an exact replica. Also the mold get's a coat of gel coat before the material and resin is applied, which will be the color of the shower base. Gel coat is basically high quality fiberglass resin that's pigmented to match any color needed. Gel coat also has additives, which stop the paint from sagging and add strength to the resin. Gel coat can be brushed or hand rolled on, but for a professional finish the gel coat has to be applied with a spray gun.
Things You'll Need
- Shower base mold
- Mold wax
- Gel coat
- Small buckets
- Stir stick
- Gel coat spray gun
- Fiberglass mat
- Razor knife
- Fiberglass resin
- 4 Inch felt roller
- Air roller
- Metal scraper
Purchase a shower base mold online; one good source ist he Gruber-Systems website.
Prepare the surface of the mold by applying two coats of mold wax and let it dry. Wipe away any excess wax with a clean rag.
Put on rubber gloves and mix the gel coat with the catalyst in a small bucket following the recommendations on the containers. Using a stir stick thoroughly mix the catalyst into the gel coat. Add the gel coat to the spray gun.
Apply the first coat as evenly as possible in a heavy mist. Let the gel coat harden. Apply a second heavier coat to the surface, which will solidly cover the mold. Let the gel coat harden for at least one hour.
Cut a layer of fiberglass mat that covers the entire mold using a razor knife. Using the first layer as a pattern, cut four additional layers.
Add the catalyst to a small bucket of resin following the recommendations on the containers. Mix the catalyst into the resin using a stir stick.
Wet the entire surface of the mold with the resin mixture using a inch felt roller. Apply the first layer of mat without letting it overlap anywhere and saturate it with resin using the felt roller. Remove any air bubbles trapped underneath the mat by rolling out the entire layer with an air roller. Repeat this process for each layer until they're all applied to the mold. Let the fiberglass cure until it's hard and cool to the touch.
Grind the rough edges of the mold smooth using an air grinder. Insert the metal scraper in between the fiberglass and the mold and slowly work the base free from the mold.
Tips & Warnings
- Wear rubber gloves when working with catalyzed materials to avoid chemical burns.
How to Make a Fiberglass Shower Floor Less Slippery
A slip and fall in a shower can cause serious injury, especially in older adults. Slipping can cause pulled muscles, fractured bones...
How to Resurface Fiberglass Shower Base
Bathing and showering have a surprisingly dirty history, and at times in recorded history, bathing was even considered unhealthy and immoral. For...
Acrylic vs. Fiberglass Shower Pans
The bottom of a shower is known as a shower pan, shower base or shower tray. These pans are designed to safely...
Mud Set Shower Pan Vs. Fiberglass Shower Pan
Bathroom renovation and design usually include a bath or shower, and walk-in showers require a shower pan. Whether mud-set or fiberglass, shower...