How to Set the Clock on a JVC Radio

Japan Victor Company, or JVC, has been at the leading edge of consumer electronics for over 80 years. From digital video devices to personal stereo equipment, JVC competes with the best manufacturers in the world. For their car stereo systems, the goal has been to deliver a high level of performance while maintaining a simple protocol for user interface. The procedure for setting their car-radio units is an example of this effort.

Instructions

1. Turn on the JVC radio by pressing the "SOURCE" button in the upper left corner of the radio.

2. Press the "AV MENU" button located at the top of the display window on the radio, and then "ENTER" (found on the bottom left of the radio's face) two times. Press the round selector on the face downward to highlight "OFF" on the menu, and press "ENTER". This will cancel the factory demonstration mode that plays when the radio is operated for the first time.

3. Press the "AV MENU" button and then "ENTER". This will put you into the "settings" mode.

4. Press the circular selector control down until "clock" is selected. Press "ENTER".

5. Use the selector control to adjust the hours and minutes, and to designate AM or PM. After selecting the correct values (example: a "12" for 12 o'clock), press "ENTER". Once the time is set and AM or PM is selected, press "ENTER" one final time to exit the settings mode.

Tips & Warnings

• You can sit through the demonstration or cancel it as described in step 1.