How to Make Barefoot Sandals

eHow may earn compensation through affiliate links in this story. Learn more about our affiliate and product review process here.
Barefoot sandals
Image Credit: Hannah Weflen

Do you want to make boho-inspired barefoot sandals for summer? This project takes under an hour to complete, and you can get all the materials at your local craft store. We used the Bead Landing brand, but any beading will work.

Advertisement

Things You'll Need

Video of the Day

Materials
Image Credit: Hannah Weflen
  • Approximately 85-inches Gold Chain 243.5 cm
  • 6 4 mm jump rings
  • Cutting pliers
  • Jewelry pliers
  • 2-inch eye pins
  • Approximately 24 Beads
  • 8.5 mm lobster claw clasps

Advertisement

Video of the Day

Note: This is for a size 7 foot. You may need more or less gold chain depending on your foot size.

Tip: Size your chain by wrapping it around the outline of the sandal. Starting at your ankle, pull the chain to your bottom of your toe and back to your ankle, then around your ankle two times. This should give you an idea of how much chain you need.

Advertisement

Step 1: Cut the Chain

Cut the chain.
Image Credit: Hannah Weflen

Cut a 4-inch piece of chain using the clippers.

Advertisement

Step 2: Connect the End of the Chains

Connect both ends of the chain with a jump ring.
Image Credit: Hannah Weflen

Using a pair of pliers, grasp the jump ring on either side and pull apart in a twisting motion. Slide one link from each end of the chain onto the jump ring. Reverse the twisting motion with your pliers to put the jump ring back together. You should now have a 2-inch loop.

Advertisement

Step 3: Connect the Eye Pin

Connect the ring to the eyepin.
Image Credit: Hannah Weflen

Thread the open end of the eye pin through the jump ring. Close the eye pin similar to the way you closed the jump ring.

Advertisement

Advertisement

Step 4: Lay Out the Beads

Lay out your design.
Image Credit: Hannah Weflen

Prepare your design by laying out the beads in whatever design you choose. You can arrange them however you like, but make sure you mimic the pattern on both sandals.

Advertisement

Step 5: Thread the Beads On the Eye Pin

Thread your beads.
Image Credit: Hannah Weflen

Thread your beads onto the eye pin.

Advertisement

Step 6: Close the Eye Pin

Close the eye pin.
Image Credit: Hannah Weflen

Use your pliers to bend the straight end of the eye pin into a hook.

Step 7: Connect the Eye Pin to the Chain

Connect the eye pin.
Image Credit: Hannah Weflen

Loop the hook through the end link of your remaining chain.

Advertisement

Step 8: Close the Eye Pin

Clamp the hook.
Image Credit: Hannah Weflen

Close the hook to secure the eye pin to the chain.

Step 9: Wrap the 2-inch Loop Around Your Toe

Put your toe through the loop.
Image Credit: Hannah Weflen

Wrap the 2-inch loop around your toe.

Step 10: Wrap the Chain Around Your Ankle

Wrap the chain around your ankle.
Image Credit: Hannah Weflen

Wrap the chain around your ankle two times and then back to the eye pin.

Step 11: Attach the Chain to the Eye Pin

Cut the chain and attach it to the eye pin.
Image Credit: Hannah Weflen

Cut the chain where it meets the eye pin. Use another jump ring (see step 2) to connect the loose chain to eye pin.

Step 12: Cut the Chain in the Back of the Ankle

Add a lobster claw.
Image Credit: Hannah Weflen

Cut the chain at the center back of the ankle.

Advertisement

Step 13: Add a Lobster Claw

Add a lobster claw.
Image Credit: Hannah Weflen

Connect a jump ring to one raw end of the chain. Add a second jump ring to the other raw end of the chain and add a lobster claw.

Variations

Your finished beaded rope sandals.
Image Credit: Hannah Weflen

Add a fun twist to this project if you'd like. Use a piece of hemp, braided rope, leather strips, seashells, glass beads, charms or any other jewelry element you have on hand.

Advertisement

resources

Report an Issue

screenshot of the current page

Screenshot loading...