How to Clean Silver With Ammonia

Save

Tarnish plagues sterling silver as well as silver plating, marring the surface of your favorite bracelet or vase and causing an unappetizing film on the silver item. Basic ammonia eliminates this discoloration and works beautifully as a silver dip or as the primary component in a homemade silver polishing paste. No matter which method you choose, always rinse the piece thoroughly with cool water after you’ve removed all tarnish and then buff dry it with a clean cloth. The smell of undiluted ammonia can be nauseating and potentially damaging to your health with lengthy exposure, and direct contact causes issues for those with sensitive skin.

Keep Safety in Mind

  • Before you start working with ammonia, open plenty of windows and turn on fans to keep your workspace well ventilated. Wear non-latex gloves, preferably nitrile, to protect your hands without hindering the cleaning process. Latex gloves can cause new tarnish on silver and make the existing tarnish difficult to remove. If you’re sensitive to strong odors, a face mask makes the cleaning process more tolerable. Opt for a non-ammonia cleaning method when handling jewelry outfitted with turquoise, opals or pearls. A paste of baking soda and water works well for sterling silver, while a bit of mineral oil on a soft cloth safely polishes silver-plated jewelry.

Prep the Silver

  • Even the smallest amount of dust has the potential to scratch silver during polishing, so begin by washing the piece with vegetable-based or an alkaline mild dish soap and warm water. Check the label of your dish soap to make sure it doesn’t contain any bleach. Chlorine causes pitting in silver, and if it mixes with the subsequent ammonia the combination produces a toxic gas. Once the piece is clean, rinse it thoroughly with cool water and dry it with a soft cotton flannel cloth.

    Quick tip: Give yourself a head start on polishing by buffing any tarnish on the silver as you dry. For very mild tarnish, this may be all that’s necessary to restore the silver’s shine.

Polish With Ammonia

  • Mild tarnish dissolves when cleaned with a soft flannel cloth dipped in diluted ammonia. Straight ammonia is too harsh for most types of silver; while it does remove tarnish, it also damages the metal underneath. Combine 1/4 cup of cool water with 1 teaspoon of unscented ammonia and work in gentle buffing motions to lift the discoloration. For recessed areas, dip a soft baby toothbrush in the solution and gently scrub the tarnish.

Soak Briefly for Heavy Tarnish

  • For moderate to severe tarnish, soak the silver in diluted ammonia for 10 to 40 minutes prior to polishing with a soft cloth. A 1/4 cup of diluted ammonia won’t completely cover many pieces, so increase the recipe to fully submerge the silver in the solution. For severe cases -- when restoring a vintage find or a piece you’ve had in storage for years -- add about 2 teaspoons of non-bleach alkaline dish soap to the mix. When you see the tarnish start to lighten or change colors, remove the silver from the dip and buff tarnished areas with a soft cloth.

    Quick tip: Prevent heavy tarnish buildup by regularly shining silver with an untreated polishing cloth and storing items with an anti-tarnish strip nearby.

Create a Polishing Paste

  • By mixing ammonia with whiting powder, it creates a gently abrasive paste ideal for heavy tarnish. Dilute the ammonia as you would to create a dip or polishing liquid, and then add whiting powder until it's the consistency of toothpaste. Scoop some up with a cloth and apply it in circular motions to the silver. For a slightly more abrasive version, keep the diluted ammonia and whiting powder separate, dipping the cloth in the ammonia, and then in the powder before applying it to the silver. Both options work well for sterling silver, but they can wear down the coating on silver-plated pieces, especially if used on a regular basis.

References

  • Photo Credit olgakr/iStock/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • How to Clean with Ammonia

    Ammonia is an active ingredient in many of the expensive cleaning supplies found on store shelves. Save yourself some money and grab...

  • How to Clean Silver That Is Discolored by Salt Water

    Silver used in home decorations and dining ware, whether sterling or plated silver, must be given special care to keep it in...

  • How To Clean Nickel or Silver

    Cleaning metals can be difficult; what cleans nickel may turn silver black and harsh chemicals will scratch both. Nickel silver, an alloy...

  • How to Clean a Silver Polishing Cloth

    Pretreated silver polishing cloths last an average of two years without washing. Untreated cloths must be used with polish but can be...

  • How to Remove Silver Nitrate Stains

    Silver nitrate has many uses in today's world, ranging from photography and ceramics to the laboratory. During use, accidents can and will...

  • Homemade Jewelry Cleaner with Ammonia

    After several day's wear, the most perfect diamond in the world will look duller than it should. Because sparkle and shine are...

  • The Best Ways to Clean Silver

    The beauty of silver comes from its shine. When silver comes in contact with sulfur compounds, such as hydrogen sulfide in the...

  • Cleaning Sapphires

    Sapphire, a corundum stone from the same category as the ruby, is one of the hardest and most durable of the gemstones....

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!