How to Program RCA Niteglo Remote Control

Save

The RCA Niteglo universal remote control eliminates the need for multiple remote controls to operate the different devices in your home entertainment center. To use the Niteglo with your devices, you need to program each of the devices into the remote control. The Niteglo has two methods for programming: manual code entry and automatic code search. Each method is convenient for programming the remote, but you need to know the proper manufacturer codes to use the manual code entry.

Things You'll Need

  • RCA Niteglo user manual

Manual Code Entry

  • Review the code list located in the Niteglo user manual. The codes are listed by the manufacturer of the device you are programming.

  • Turn on the device you want to program.

  • Hold down the "Code Search" button on the Niteglo universal remote control until the indicator light turns on.

  • Push the button on the remote control that corresponds with the device you are programming. For example, if you are programming the television, press the "TV" button. The indicator light will blink once and remain lit.

  • Enter the first code next to your device's manufacturer using the keypad on the Niteglo. The indicator light will turn off if the code is entered correctly.

  • Press the "Power" button on the Niteglo remote. The television will turn off if the code works with your device and remain on if the code does not work.

  • Repeat Steps 3-6 with the remaining codes for your device's manufacturer until the television turns off.

  • Turn the television on again and press the "Channel Up" to test the code. If the channel does not change, repeat Steps 3-6 with the other codes on the list. If the channel does change, programming is complete.

  • Repeat Steps 1-8 for the other devices you want to program to the remote control.

Automatic Code Search

  • Turn on the device you want to operate.

  • Hold the "Code Search" button until the indicator light comes on. The Niteglo remote control is now in programming mode.

  • Press the corresponding button of the device you want to program. For example, if you are programming a cable box, press the "CABLE" button. The indicator light will blink once and remain lit.

  • Point the Niteglo remote control at the device and repeatedly press the "Power" button until the device turns off. It may take up to 200 button presses before you find the code.

  • Press the "Enter" button to save the code when the device turns off.

References

  • "RCA Niteglo Universal Remote Control ROU4GLW;" Thomson Consumer Electronics, Inc.; 1996
  • Photo Credit Creatas/Creatas/Getty Images
Promoted By Zergnet

Comments

Resources

You May Also Like

Related Searches

Check It Out

Geek Vs Geek: Robot battles, hoverboard drag race, and more

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!