How to Prevent Frost Heave in Concrete Slabs

Save

Frost heave occurs in concrete slabs when water in the soil underneath the concrete freezes, displacing the soil and in turn heaving up the concrete. This process forms unattractive cracks and hills in the slab. Once the concrete is laid, you cannot do anything to stop frost heave other than wait and let the soil and concrete settle. The key is to take measures to prevent frost heave before you lay down the concrete.

Things You'll Need

  • Soil compactor
  • Concrete
  • ½-inch steel reinforcing bars
  • Fibermesh slab
  • Excavate a foot into the ground and compact the soil with a soil compactor, which you can usually rent from hardware stores. This will prevent water from penetrating into the soil as easily and provide a solid base for the concrete slab.

  • Lay down 6 inches of crushed gravel as a layer between the soil and the concrete, creating a porous area from which the water can drain. Place a 4-inch perforated pipe in the gravel and route it to a dry well, or just outside of the area where the concrete slab is located.

  • Pour the concrete slab until it is about 3 inches thick. Lay down ½-inch steel reinforcing bars 2 feet apart from one another and then a fibermesh slab. These will prevent shrinking and cracking and strengthen the concrete, making it less susceptible to frost heave. Pour 3 more inches of concrete on top of that to finish off the slab.

Tips & Warnings

  • Avoid pouring concrete on hot, sunny or breezy days. Overcast days with mild temperatures around 60 degrees Fahrenheit are the best days for pouring.

References

  • Photo Credit Hemera Technologies/AbleStock.com/Getty Images
Promoted By Zergnet

Comments

You May Also Like

  • Why Does Concrete Pit?

    Concrete is one of the strongest and most widely used materials in home-foundation building and industrial-building construction. However, it does have a...

  • Types of Concrete Slab Designs

    Concrete slabs are common in building construction. Used for foundations, porches, decks, patios, and driveways, concrete slabs comprise several variations with four...

  • How to Keep Frost Heaves From Lifting a Concrete Driveway

    When temperatures drop below freezing, underground moisture trapped beneath a surface expands as it freezes. If a driveway does not have a...

  • How to Fix a Heaved-Up Concrete Slab

    Frost heaves create hazardous and unsightly cracks in concrete slabs along a driveway, pathway or walkway. Left untreated, these cracks spread over...

  • How to Repair a Heaved Pavement Driveway

    A cracked driveway is both unsightly and hazardous, the ground underneath causing the asphalt to crack. This natural wear and tear during...

  • How to Fix Concrete Sidewalk Heaves

    Concrete sidewalk heaves result from water flooding beneath the pavement and freezing. The freezing water expands, pushing the pavement upwards, and causing...

  • How to Repair Heaved Basement Floors

    Repairing uneven or heaved concrete basement floors can be a challenge. In some cases the “repair” for the problem may be the...

  • How to Prevent Frost Heave in Fence Posts

    When installing fence posts, it is vital that you set the posts properly to prevent frost heave. Frost heave is a condition...

  • How to Pour Concrete Slab Footers

    Concrete footings are designed to provide a submerged support to attach vertical support beams for decks, stairs or other structures or to...

  • How to Prevent Frost Heaves

    Frost heaves are bulges in the surface of the ground that can cause damage to man-made structures. In cold weather, frost heaves...

  • Types of Floor Slabs

    A floor slab is a poured concrete area designed for use as the foundational structure of a house. Floor slabs may be...

  • What Are the Causes of Concrete Cracks and Heaving?

    Cracking and heaving are common flaws in concrete. Because concrete is a mixture of cement, gravel and sand, it has a finite...

Related Searches

Check It Out

22 DIY Ways to Update Your Home on a Small Budget

M
Is DIY in your DNA? Become part of our maker community.
Submit Your Work!