Price Pfister's Marielle kitchen faucets are based on vintage French country designs, combining smooth edges and oftentimes a rustic finish. All Marielle models are single-handle-controlled, meaning that one handle controls the quantity and temperature of water that passes through the faucet's spout. Below the faucet's handle is a single faucet valve, which consists of a number of seals. Accessing the faucet valve to either repair or replace its seals requires that the handle first be removed.
Things You'll Need
- Small standard screwdriver
- Thin tape
- 3/16-inch hex wrench
- Phillips-head screwdriver
Cut the water supply off at the two valves located underneath the sink's basin. The handle of each valve must be twisted in a clockwise direction.
Pry off the handle cap with the blade of a small standard screwdriver. The handle cap is located at the center of the handle and conceals the handle's lever retaining screw. To avoid damaging the finish of the cap or of the handle, wrap the blade of the screwdriver with a single layer of thin tape. The key to removing the handle cap is to gradually pry the cap off of the top of the handle evenly.
Remove the handle's lever retaining screw from the center of the handle. Unlike traditional screws, this retaining screw features a hex-head design, which can be removed only with a 3/16-inch hex wrench, sometimes referred to as an Allen wrench. Pull the lever retaining screw out of the handle along with the metal split washer located underneath the screw.
Lift the handle lever off of the faucet assembly to access the handle skirt.
Remove the handle skirt. The handle skirt is the base of the handle assembly and is held in place with a single Phillips-head screw. Remove the screw with a Phillips-head screwdriver, then lift the skirt off of the top of the faucet.
- "Price Pfister 532 Series Marielle Single Control Pullout Kitchen Faucet Installation Instructions;" Price Pfister; 2008
How to Remove a Nut From a Kitchen Faucet
Removing a nut from a kitchen faucet needs to be done any time you have a problem with your kitchen faucet plumbing...
How to Remove Eljer Faucet Handles
Eljer creates high quality faucet handles often marketed as part of Moen collections for commercial and residential sale. Many of the dual-handled...
How to Remove the Spout Cap From a Delta Kitchen Faucet
Single handle Delta kitchen faucets have a spout cap between the handle and the top of the faucet spout. You will need...
How to Remove a Price Pfister Faucet
When it is time to update the look of your kitchen, you may consider updating your Price Pfister faucet. The Price Pfister...
How to Remove a Kitchen Faucet Handle
Your kitchen faucet handle is attached to a fixture called a valve stem. As you rotate the handle, it moves the stem,...